Operation Manual

Removing and installing components
during servicing
Removing the cover
1
1
2
► Remove the screw (1).
► Lift the cover off the notebook (2).
Keep the screw in a safe place. If you are removing several components at the same
time, store the screws for the individual components sepa rately from each other.
When installing the cover, you must use the correct screws.
If you install the wrong screws, components may be damaged.
Removing memory modules
3
2
1
1
► Carefully pus
h the two m ounting
clips outwar
ds (1).
MemoryexpansionMemorymodule

The me mory module snaps upwards (2).
► Pull the m em
ory module out of its slot
in the direc
tion of the arrow (3).
50 Fujitsu