Operation Manual

Working with the noteb ook
Switching the wireless components on and off
► Press the key combination
Fn
+
F5
to start the WirelessSelector.
WirelessLANWirelessLANBluetoothBluetooth

The wireless component indicato r will illuminate when one or more wireless
components are switched on.
The Bluetoo th module and the wireless LAN transmission unit (antenna) will
be switched off w hen you switch off the radio components.
Pay attention to the additional safety notes for devices with wire less
components provided in the "Safety" manual.
Details on using a Wireless LAN can be found in the online help system
included in the Wireless LAN softwa re.
Setting up WLAN access
• Requirement: A W LAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating s ystem.
Ethernet and LAN
EthernetLAN
The internal network module of y our notebook supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Network).
2
1
► Connect the network cable to the LAN
port of the notebook (1).
► Connect the n
etwork cable to your
network co nn
ection (2).
Your network administrator can help you to config ure and use the LAN connections.
The network cable is not included in the delivery scope. This type of
cable can be obtained from a specialist dealer.
38 Fujitsu