Operation Manual

Removing and installing components
during servicing
Attaching the cover
2
2
1
2
2
2
2
2
2
► Place the cover in the correct mounting position (1).
Make sure that you have tightened the screws correctly and that
the keyboard is firmly seated.
Make sure that you use the correct screws, they have different lengths.
► Tighten the screws (2).
► In ser t the battery (see Chapter "
Insertin g ba ttery", Page 33).
Finishing component removal
After you have remo ved or changed the system components as you required, please
prepare your device for operation again as follows:
► In stall the battery again (see "
Insertin g battery" , Page 33).
► Turn the not ebook the right way up again a nd place it on a flat surface.
► R eco nnect the cables that you disconnected before.
56 Fujitsu