Operation Manual

First-time setup of your device
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 13.
If your device is equipped with a W indows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Before you switch on the device for the first time, connect it t o the mains voltage
using the mains adapter, see "
Mains adapt er connecting", Page 17.Themains
adapter must be connected during the entire installation process.
A system test is performed w hen your device is first switched on. Various m essages
can a ppear. The display may remain dark for a short time or may flicker.
Please fo llow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate your device using the battery.
When used o n the m ove, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, p rinter) to your
device, p lease refer to the operating manual for your device.
Unpacking and checking the d
evice
Should y ou discover any damage that occurred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your device for any visible damage which may h ave occurred during transportation.
You may need the packaging in the future, if you need to transport your device.
16 Fujitsu Technology Solutions