Operation Manual

First-time setup of your device
Selecting a location
SelectingalocationDeviceMainsadapter
Select a suitable location for the de vice before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The s urface could be damaged as a result.
• Never place the device on a soft surface (e.g. ca rpeting, upholstered furniture,
bed). This can block the air vents and cause overheating an d damage.
• The underside of the device heats up during normal operation. Prolonged contact
with the skin may b ecome unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of th e device may mark certain types of delicate surfaces.
• Keep o ther objects at least 100 mm away from the device and its
mains adapter to ensure adequate ventilation.
• Never cover the ventilation slots of the device.
• Do not expose the d evice to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
Preparingforo perationMainsadapter
Observe the safety precautions in the enclosed "Safety" manual.
The supplied power cab le conforms to the requirements of the country in
which you pu rchased your device. Make sure that the power cable is approved
for use in the country in which you in tend to use it.
3
1
2
► Connect the power cable ( 1) to the
mains adapter.
► Plug the mains cable (2) into a mains outlet.
► Connect the mains adapter cable (3) to
the DC jack (DC IN) of the device.
Fujitsu Technology Solutions 17