Operation Manual

Working with the n o tebook
Removing the card
Always remove the card according to the rules described below, to
ensure that none of your data is lost.
You can stop the card using the corresponding icon in the task bar:
► Left click on the icon to safely remove hardware, located in the taskbar.
► Select the card you want to stop
and remove.
► Press the "Enter" key.

Wait fo r the dialog box which tel
ls you that it is now safe to remove the card.
1
2
► If the eject button is lowered, you must
first cause the eject button to release
from the notebook ca sing. To do this,
press the eject button until it pops out.
Press the eject button (1) so that the card
protrudes a little from the notebook.
► Pull the card out of the slot (
2).
► Insert the card placeholder into the
slot guide.
► Carefully s lide the placeholder for the
cardasfarasitwillgointotheslot.
Do not use excessive force.
Loudspeakers and microphones
Microph
one
Loudspe
akers
Basslou
dspeaker(subw oo fer)
Volume c
ontrol
Information on the exact position of the speakers and microphone can be
found in "
Ports and controls", Pag e 9.
Please refer to chapter "
Key combina tions", Page 25 for information on setting the volume
and also enabling/disabling the loudspeakers using key combinations.
If yo u attach an external microphone, the built-in microphone is disabled.
When you connect headphones or ext ernal speakers, the built-in speakers are disabled.
Information on connecting headphones and a microphone can be found
in "
Connecting external devices", Page 50.
Fujitsu Technology Solutions 41