Operation Manual

Security functions
Deactivating hard disk protection
To cancel a password without setting a new one, proceed as follows:
► Call up the BIOS Setup and select the Security me nu.
► Mark the Hard Disk Security field and press the Enter key.
► In the Drive0 area mark the Set Master Password field and press the Enter key.

You will be initially requested to enter the old password by the Enter current Password prompt.
You will then be requ este d to enter a new password by the Enter new Password prompt.
► After entering the password, press the Enter key three times.
► Fr om the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.

The notebook reboots, and password protection for the hard disk is cancelled.
► To cancel the password for the second hard disk (Drive1), go to the Drive1 area
and select the field Set Master Password, then proceed in exactly the same wa y as
for c ancelling the password for the first hard disk (Drive0).
Fujitsu Technology Solutions 49