Operation Manual

Connecting external devices
Connecting external devices
Always refer to the safety information provided in "Important notes", Page 13 before
connecting or disconnecting any devices to or from your notebook.
Always read the documentation supplied with the device you wish to connect.
Never connect o r disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Follow the s teps below in order, when connecting or disconnecting
devices to your notebook:
With some devices such as USB devices, it is not necessary to switch off
the notebook and the device before connecting/disconn ecting. F or m ore
information about whether or not devices need to b e switched off, please refer
to the documentatio n supplied with the external de vice.
Some of the extern al d evices require special drivers (see the operating
system and external device documentation).
Connecting dev ices to the notebook
1. Turn off your notebook and all external devices.
2. Unplug yo ur notebook and al
l devices from the mains sockets.
3. Connect the cables for your e xternal devices following the instructions.
4. Plug all power cables into t
he mains sockets.
DevicesPeripher alde
vices
Disconnecting devices from the notebook
1. Turn off your notebook and all external devices.
2. Unplug yo ur notebook and all dev
ices from the mains sockets.
3. Disconnect the cables for your external devices following the instructions.
DevicesPeripher aldevices
50 Fujitsu Technology Solutions