Operation Manual

Removing and installing components
during servicing
Installing the optical drive
1
2
2
1
► Slide the drive into the notebook (1).
► Fasten the screw s (2).
► Complete the removal, see "
Finishin g compo nent removal", Pa ge 65.
Finishing component removal
After you have removed or changed the syst em components as you required, please
prepare y our device for operation again as follows:
► Install the battery again (see "
Installing a battery", Page 33).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected before.
Fujitsu Technology Solutions 65