Operation Manual

Troubleshooting and tips
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is not switche d on. ► M ake sure that the printer is switc
hed
on and ready for ope ration (refer
to the
documentation supplied with the
printer).
The printer is not connected corr
ectly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not c orrectly
installed, or it is the wrong printer driver.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
Theradioconnectiontoan
etwork does not work
Theradioconn ecti
ontoane tworkdoes not work
Cause Troubleshooting
The wireless component is di
sabled.
► Switch the radio component on (see
"
Switching the wireless components on and
off", Page 43).
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.
► Check whether the radio connection is
switched on via the software.
► Furt her information on using the radio
component can be found in the help files.
Acoustic warnings
Acousticwa
rnings
Errormessa
ge:
Cause
Troubleshooting
A beep sounds every few seconds
The battery is almost fl at.
► C harge the battery.
Error messages on the screen
Errormessages onthes cr eenError message:
This section describes the error messages generated by the BIO S Setup. Error messages displayed
by the operating system or programmes are described in the relevant documentation.
If the error message appears repeatedly, despite troubleshooting measures, please
contact the place of purchase or our customer service centre.
Fujitsu Technology Solutions 73