Operation Manual

Ports and operating elements
Radio components: UMTS (optional)/wireless
LAN/Bluetooth
WirelessLANBluetoothUMTS
The installation of a w ireless LAN, Blueto oth or UMTS module not approved b y Fujitsu
Siemens Computers GmbH voids the permits (CE!, FCC) issued for this device.
Fujitsu Siemens Computers GmbH has printed the correct pe rmit number for
all factory-inst alled radio c ompone nts on the ra ting plate.
The modules for radio components a re switched off during shipping.
Switching the radio components
on and off
► Slide the ON /OFF button into the "ON"
position to activate the radio components.
WirelessLA NWireless LANBluetoothBl uetooth
or
► Slide the ON/OFF button to the
"OFF" position to deactivate the
radio components.
If you sw itch off the radio components, the Bluetooth and UMTS modules are powered
off and the wireless LAN transmission unit (antenna) is switched off.
The Wireless Select or enables you to switch the various radio components on and off.
You can also deactivate the radio components individually in the BIOS setup.
Pay attention to the additional sa fety notes for devices with radio
components provided in the "Safety" m anu al.
Details on using the wireless LAN are contained in the online help for your
wireless LAN software and in the "Wireless LAN" manual. (The "Wireless LAN"
manual can be found on the "Drivers & Utilities" CD/DVD.)
You can find more information on how to use Bluetooth on the C D you
received with your Bluetooth software.
You can obtain more information on UMTS from your service provider.
A26391-K225-Z120-1-7619 , edition 1 19