Operation Manual

Connecting e xtern a l devices
Connecting an external m onitor
An analogue monitor is conn ecte d to the analogue VGA monitor port, a digital monitor
to the DisplayPort or to the DVI-D monitor port on the optional Port Replicator.
Monitor output is limited to a maximum of two monitors at any one time (see "
Key
combinations", Page 25, section "Toggle output monitor").
MonitorVGAconnec tionsocketMonitorportMonitorport
Digital DisplayPort (on the notebook or on the
optional Port Replicator)
Analogue VGA monitor port (on the notebook or
on the optional Port Replicator)
Digital DVI-D monitor port (on the optional Port
Replicator)
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch between the external m on itor and the LCD monitor of the
notebook, see chapter "
Key combinatio ns", Page 25.
You can display the same picture o n the external monitor and the
notebook LCD monitor simultaneously.
If you wish to operate the monitor via a DVI port, use the optional Port
Replicator available for your notebook.
Fujitsu 57