System Operating Manual LIFEBOOK E733 LIFEBOOK E743 LIFEBOOK E753
Congratulations on your purchase of an innovative product from Fujitsu. The latest information about our products, tips, updates etc. can be found on the Internet at: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.
Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2013. All rights reserved. Publication Date 07/2013 Order No.
LIFEBOOK E733 LIFEBOOK E743 LIFEBOOK E753 Operating Manual Innovative technology 7 Ports and controls 9 Important notes 14 First-time setup of your device 17 Working with the notebook 20 Security functions 48 Connecting external devices 54 Removing and installing components during servicing 60 Settings in BIOS Setup Utility 64 Troubleshooting and tips 66 Technical data 74 Manufacturer’s notes 76 Index 77
Remarks Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions. Trademarks Fujitsu, the Fujitsu logo and LIFEBOOK are registered trademarks of Fujitsu Limited or its subsidiaries in the United States and other countries.
Contents Contents Innovative technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Memory cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Supported formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing the memory card . . . . . . . . . . .
Contents Operating BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exiting BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exit Saving Changes – save changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . Exit Discarding Changes – Discard changes and exit BIOS Setup Utility . . . . . . . . .
Contents 6 Fujitsu
Innovative technology Innovative technology ... and ergonomic design make your device a reliable and convenient companion. The device boots very quickly, is ready for immediate use and offers a particularly long operating time because of its high capacity battery. With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better protect your system against unauthorised access by using the powerful password properties.
Innovative technology Notational conventions Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information for the proper use of the device.
Ports and controls Ports and controls This chapter presents the individual hardware components of your device. It gives an overview of the indicators and ports of the device. Please familiarise yourself with these components before you start to work with the device.
Ports and controls LIFEBOOK E743: 1 5 4 2 3 1 78 9 6 5 7 11 1 2 3 4 5 6 10 = = = = = = Microphone (optional) WebCam (optional) WebCam LED (optional) Touchpad Loudspeakers TouchStick (optional) 10 7 8 9 10 11 = = = = = Status indicators Application keys ON/OFF switch Fingerprint sensor (optional) Touchpad buttons Fujitsu
Ports and controls LIFEBOOK E753: 1 2 3 1 5 4 78 9 6 5 7 11 10 1 2 3 4 5 6 = = = = = = 7 8 9 10 11 Microphone (optional) WebCam (optional) WebCam LED (optional) Touchpad Loudspeakers TouchStick (optional) = = = = = Status indicators Application keys ON/OFF switch Fingerprint sensor (optional) Touchpad buttons Left side 1 1 2 3 4 = = = = DC input connector (DC IN) Ventilation slots LAN port Monitor port (VGA) Fujitsu 2 3 4 5 6 7 8 5 = = = = 6 7 8 DisplayPort USB port 2.
Ports and controls Right side 1 2 1 2 3 4 = = = = 3 4 Headphone port Microphone port USB port 2.0 USB 2.0 port with charging function (Anytime USB charge) 5 6 5 = Module bay with optical drive 6 = Security Lock device Rear 1 2 1 = USB port 2.
Ports and controls Bottom 1 2 3 4 2 5 6 1 = Module release 2 = Battery release 3 = Port replicator port Fujitsu 4 = Rechargeable battery 5 = Ventilation slot cover 6 = Memory service compartment 13
Important notes Important notes Notes Importantnotes This chapter contains essential safety information which must be followed when working with your notebook. Other notes also provide useful information which will help you with your notebook. Safety notes Notes Safetynotes Please follow the safety notes provided in the "Safety/Regulations" manual as well as the safety notes given below. Please pay special attention to the sections in the manual marked with the symbol on the left.
Important notes Energy saving Energysaving Energy Notes Switch the notebook off when it is not in use. Switch off external, connected devices if you are not using them. If you use the energy saving functions, the notebook uses less energy. You will then be able to work for longer before having to recharge the battery. Energy efficiency is increased and the environmental impact is reduced. You save money while protecting the environment.
Important notes Notebook: transporting Protect the notebook from severe shocks and extreme temperatures (e.g. direct sunlight in a car). ► ► ► ► ► ► If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives. Switch the notebook off. Unplug the mains adapter and all external devices from the power socket. Disconnect the mains adapter cable and the data cables for all external devices. Close the LCD screen.
First-time setup of your device First-time setup of your device Gettingstarted First-timesetup Please read the chapter "Important notes", Page 14. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before you switch on the device for the first time, connect it to the mains voltage using the mains adapter, see "Mains adapter connecting", Page 18.
First-time setup of your device Selecting a location Selectinga location Mainsadapter Device Select a suitable location for the device before setting it up. Follow the instructions below when doing so: • Never place the device or the mains adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can block the air vents and cause overheating and damage.
First-time setup of your device Switching on the device for the first time Switchingon for thefirsttime On devices with ON/OFF switch for wireless components: Slide the ON/OFF switch for wireless components to the ON position before switching on the device. When you switch on the device for the first time, the supplied software is installed and configured.
Working with the notebook Working with the notebook Notebook Notebook,operation This chapter describes the basics for operating your notebook. Please read the chapter entitled "Connecting external devices", Page 54 for instructions on how to connect devices such as a mouse and a printer to the notebook. Please refer to the notes in "Important notes", Page 14.
Working with the notebook Key Description Battery charging indicator (Battery 1/Battery 2)/Power supply The state of charge of the battery is shown by the battery indicator. • • • • • Indicator is illuminated (green): The battery is charged or no battery has been inserted. The indicator lights up orange: the mains adapter is connected and the battery is being charged.
Working with the notebook Switching on the notebook ► Open the LCD screen. Switching on ► Press the ON/OFF switch for about one second to switch the notebook on. The power-on indicator is lit. Notebook: switching off Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. ► If the notebook is not switched off automatically, press the ON/OFF switch for approx. five seconds.
Working with the notebook Keyboard Keyboardkeypad Numeric Buttons The keyboard of your notebook is subject to continuous wear through normal use. The key markings are especially prone to wear. The key markings are liable to wear away over the life of the notebook. The keyboard has been designed to provide all the functions of an enhanced keyboard. Some enhanced keyboard functions are mapped with key combinations. The following description of keys refers to Windows.
Working with the notebook Key Description Backspace key The Backspace key deletes the character to the left of the cursor. Backspace Tab key The Tab key moves the cursor to the next tab stop. Tabkey Enter key (return) The Enter key terminates a command line. The command you have entered is executed when you press this key. Linefeed Enter Return Enterkey Caps Lock key The Caps Lock key activates the Caps Lock mode, and the corresponding icon is displayed in the Windows information area.
Working with the notebook Virtual numeric keypad Numeric Num Virtualnumerickeypad Lock keypad LIFEBOOK E733 and LIFEBOOK E743 have virtual number blocks, LIFEBOOK E753 has a separate number block. To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers and symbols printed in the upper right corner of each key.
Working with the notebook Separate number block Numeric Separatenumeric Num Lock keypad keypad LIFEBOOK E733 and LIFEBOOK E743 have virtual number blocks, LIFEBOOK E753 has a separate number block. The keyboard of your notebook has a separate number block on the far right. Key combinations Keycombinations The following description of key combinations applies to Windows operating systems. Some of the following key combinations may not function in other operating systems or with certain device drivers.
Working with the notebook Combination Description Switching the touchpad and touchpad buttons on/off This key combination switches the touchpad and the touchpad buttons on or off. Touchpadbuttons Touchpad Fn+F4 Decrease screen brightness This key combination decreases the brightness of the screen. Screenbrightness LCDscreen Fn+F6 Increase screen brightness This key combination increases the brightness of the screen.
Working with the notebook Country and keyboard settings ► Change the country and keyboard settings as described in the documentation for your operating system. Application keys Applicationkeys Your notebook is equipped with two application buttons. Button Description Eco button (E key) The E key is a simple way of activating and deactivating power management functions (e.g. reduce screen brightness), see "Using the power-management features", Page 39.
Working with the notebook Touchpad and touchpad buttons Keep the touchpad clean. Protect it from dirt, liquids and grease. Touchpad Do not use the touchpad if your fingers are dirty. Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons. 1 = TouchStick (optional) 1 2 = Touchpad 3 = Touchpad buttons 3 The touchpad enables you to move the mouse pointer on the screen. The touchpad buttons allow you to select and execute commands.
Working with the notebook Dragging items ► Select the desired item. ► Press and hold the left button and drag the item to the desired position with the finger on the touchpad. The item will be moved. Touchpad LCD screen Notes LCDscreen High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. For technical reasons, TFT monitors are manufactured for a specific resolution.
Working with the notebook Webcam Webcam Depending on the device variant, a WebCam may be integrated in your notebook. Depending on the software used, you can use your Webcam to take pictures, record video clips or take part in web chats. The WebCam has its own status indicator. The indicator lights up when the WebCam is switched on. • • • • The picture quality depends on the lighting conditions and the software being used. You can only operate the webcam with a particular application (e.g.
Working with the notebook Rechargeable battery Life,battery Battery Rechargeablebattery When not plugged into a mains socket, the notebook runs on its built-in battery. You can increase the life of the battery by caring for the battery properly. The average battery life is around 500 charge/discharge cycles. You can extend the battery life by taking advantage of the available energy saving functions.
Working with the notebook Removing a battery ► Prepare for removal, see chapter "Preparing to remove components", Page 61. 1 2 3 ► Slide the release button in the direction of the arrow (1). ► Slide the release button in the direction of the arrow (2) and hold it in place. ► Remove the battery from the battery compartment (3). Installing a battery ► Position the battery at the edge.
Working with the notebook Module Modules Modulebay The design of your notebook enables the flexible use of notebook batteries and drives. The following modules can be operated in the module bay of your notebook: • • • • • • Second battery Second hard disk drive DVD RW drive Blu-ray BD-W drive Weight Saver LIFEBOOK Bay Projector Only use modules designed for your notebook. Do not use force when installing or removing the module. Make sure that no foreign objects enter the module bay.
Working with the notebook Installing a module ► Place the module into the module bay so that the contacts enter first. ► Push the module into the module bay until you feel it locking into place. Optical drive Opticaldrive This product contains a light emitting diode, classification according to IEC 60825 1:2007: LASER CLASS 1, and must therefore not be opened. Handling data carriers Handling Observe the following guidelines when handling data carriers: Avoid touching the surface of a data carrier.
Working with the notebook CD/DVD indicator CD/DVDindicator The CD/DVD indicator flashes when a data carrier is inserted. The indicator goes out when the drive is ready for reading. The indicator lights up when the drive is being accessed. You may only remove the data carrier when the indicator is unlit. If the CD/DVD indicator does not go out after a data carrier has been inserted, but instead continues to flash, this means that the drive cannot access the data carrier.
Working with the notebook Manual removal (emergency removal) Emergencyremovalofdata carrier Manualremovalofdatacarrier CD/DVD: In the event of a power failure or damage to the drive, you can remove the data carrier manually. ► Switch your notebook off. ► Push a pen or a piece of wire (such as a paperclip) firmly into the opening (1). The drive tray is ejected. You can now pull the drive tray (2) out of the drive.
Working with the notebook Removing and fitting the dust removal cover (ventilation slot cover) In order to ensure optimum cooling of the components in your notebook, you should periodically clean the ventilation slot of the heatsink. This ensures optimum fan performance. You can achieve the best cleaning results with a small hand-held vacuum cleaner. If necessary, you can also use a dry brush to release dust from the ventilation slots.
Working with the notebook Using the power-management features Battery Power The notebook uses less power when the available power-management features are used. You will then be able to work longer when using the battery before having to recharge it. Power efficiency is increased and environmental pollution reduced. By choosing the best power options, you can make significant savings and at the same time help protect the environment.
Working with the notebook Memory cards Slot Your notebook is equipped with an integrated memory card reader. Observe the manufacturer’s instructions when handling the memory cards. Memory card Supported formats Your notebook supports the following format: • Secure Digital (SDTM card) Inserting the memory card ► Carefully slide the memory card into the slot. The label should be facing upward. Do not apply excessive force, as otherwise the delicate contact surfaces could be damaged.
Working with the notebook Loudspeakers and microphones Bass loudspeaker (subwoofer) Loudspeakers Microphone Volumecontrol Information on the exact position of the speakers and microphone can be found in "Ports and controls", Page 9. Please refer to chapter "Key combinations", Page 26 for information on setting the volume and also enabling/disabling the loudspeakers using key combinations. If you attach an external microphone, the built-in microphone is disabled.
Working with the notebook Removing the SIM card ► Prepare for removal of the SIM card, see chapter "Preparing to remove components", Page 61. ► Press on the edge of the SIM card so that it jumps up slightly out of the slot. ► Pull the SIM card out of the slot in the direction of the arrow (1). 1 ► Complete the removal, see chapter "Finishing component removal", Page 63.
Working with the notebook Setting up WLAN access • Requirement: A WLAN must be available and you must have the corresponding access information. Information on configuring the WLAN access can be found in the documentation for your operating system. Access via UMTS/LTE You can purchase the accessories for UMTS/LTE reception from your retailer or your Fujitsu Technology Solutions dealer. If you have ordered a UMTS/LTE module, your device will already be prepared when you receive it.
Working with the notebook Your Port Replicator The Port Replicator is a device that helps you to quickly connect your notebook to your peripheral devices, such as a monitor, printer etc. The features offered by the Port Replicator include standard ports for monitor, audio, mouse and keyboard. You need only dock the notebook in order to work with your peripheral devices.
Working with the notebook Connecting the notebook to the Port Replicator If you connect the notebook to the Port Replicator during operation, problems can occur. We recommend that you switch off the notebook beforehand. The mains adapter must be connected to the Port Replicator when the notebook is connected to the Port Replicator. We recommend that the notebook is not operated with the LCD screen closed when the notebook is connected to the Port Replicator.
Working with the notebook Connecting the mains adapter to the Port Replicator ► Connect the power cable to the mains adapter (1). ► Plug the power cable into the mains socket (2). ► Connect the mains adapter cable to the DC jack (DC IN) of the Port Replicator (3). 3 2 1 When the notebook is connected to a Port Replicator, the operating system creates a hardware profile for the "Docked" mode. In this profile, for example, the setting is saved as to which monitor was last used for output.
Working with the notebook Disconnecting the notebook from the Port Replicator Problems may occur if the notebook is removed from the Port Replicator during operation. We recommend that the notebook is switched off or that the appropriate undocking function provided by the operating system is executed. ► Switch the notebook off. 2 1 ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2).
Security functions Security functions Securityfunctions Your notebook has several security features that you can use to secure your system from unauthorised access. This chapter explains how to use each function, and what the benefits are. Please remember that in some cases, for example, forgetting your password, you may be locked out and unable to access your data.
Security functions Using the Security Lock Your device comes with a Security Lock mechanism for the Kensington Lock Cable. You can use the Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu Technology Solutions recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook.
Security functions Protecting BIOS Setup Utility (supervisor and user password) If you have opened these operating instructions on the screen, we recommend that you print them out. You cannot call the instructions onto the screen while you are setting up the password. BIOS SetupUtility The supervisor password and the user password both prevent unauthorised use of the BIOS-Setup-Utility.
Security functions Removing passwords To remove a password (without setting a new password) perform the following steps: User password Supervisorpassword Password ► Start the BIOS Setup Utility and go to the Security menu. ► Highlight the Set Supervisor Password or Set User Password field and press the Enter key. You will be requested to enter the current password by the Enter Current Password prompt. You will be requested to enter a new password by the Enter New Password prompt.
Security functions Trusted Platform Module (TPM) (device-dependent) Trusted Platform Module TPM To use the TPM, you must activate the TPM in the BIOS Setup before the software is installed. The condition for this is that you have assigned at least the supervisor password (see "Security functions", Page 48). Enabling TPM • ► ► ► Requirement: You have assigned a supervisor password, see "Security functions", Page 48. Call up the BIOS Setup and select the Security menu.
Security functions SmartCard reader Securityfunctions Securityfunctions, Depending on the device configuration level, your notebook is equipped with a SmartCard reader. SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.
Connecting external devices Connecting external devices Always refer to the safety information provided in "Important notes", Page 14 before connecting or disconnecting any devices to or from your notebook. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug.
Connecting external devices Connecting an external monitor An analogue monitor is connected to the analogue VGA monitor port, a digital monitor to the DisplayPort or to the DVI-D monitor port on the optional Port Replicator. Monitor output is limited to a maximum of two monitors at any one time (see "Key combinations", Page 26, section "Toggle output monitor").
Connecting external devices HDMI port HDMIport Depending on the device variant, your device may include an integral HDMI port (LIFEBOOK E753). The HDMI port on your notebook can be used to connect an external amplifier, LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port of the notebook.
Connecting external devices Connecting USB devices USBports On the USB ports, you can connect external devices that also have a USB port (e.g. a DVD drive, a printer, a scanner or a modem). USB devices are hot-pluggable. This means you can connect and disconnect devices while your operating system is running. USB 1.x has a maximum data transfer rate of 12 Mbit/s. USB 2.0 has a data transfer rate of up to 480 Mbit/s. USB 3.0 has a data transfer rate of up to 5 Gbit/s.
Connecting external devices USB port with charging function (Anytime USB charge) USBchargingfunction It is recommended that the notebook be operated with the power supply connected whenever the USB port with charging function is in use, as this function will drain the battery more quickly if an external USB device is being charged.
Connecting external devices Connecting external audio devices Microphone port/Line In Microphone,connecting Audioports Audiodevices,connecting The microphone port/Line In allows you to connect an external microphone, a MiniDisc player, MP3 player, CD player or a tape deck to your notebook. ► Connect the audio cable to the external device. ► Connect the audio cable to the microphone port/Line In of the notebook.
Removing and installing components during servicing Removing and installing components during servicing Only qualified technicians should repair your notebook. Unauthorised opening or incorrect repair may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty. Servicing Components After consulting the Hotline/Service Desk, you may remove and install the components described in this chapter yourself.
Removing and installing components during servicing Preparing to remove components If you are going to remove or change system components, prepare for the removal as follows: Please observe the safety information in chapter "Important notes", Page 14. Remove the power plug from the mains outlet ! ► Switch the device off. The device must not be in energy-saving mode ! ► Close the LCD screen. ► Remove all the cables from the device. ► Turn the device over and place it on a stable, flat and clean surface.
Removing and installing components during servicing Removing a cover ► Prepare for removal, see "Preparing to remove components", Page 61. 1 2 ► Remove the screw (1). Keep the screw in a safe place. ► Lift the cover off the notebook (2). Removing memory modules ► Carefully push the two mounting clips outwards (1). The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3).
Removing and installing components during servicing Installing a memory module ► Insert the memory module with the contacts and the recess (a) facing the slot (1). ► Carefully push the memory module downwards until you feel it click into place (2). Memory module expansion 1 2 a Attaching the cover 2 1 ► Place the cover in the correct mounting position (1). ► Tighten the screw (2). ► Complete the installation, see "Finishing component removal", Page 63.
Settings in BIOS Setup Utility Settings in BIOS Setup Utility BIOS SetupUtility System Setup Configuration,BIOSSetupUtility Hardwareconfiguration settings,BIOSSetupUtility configuration The BIOS Setup Utility allows you to set the system functions and the hardware configuration for the notebook. When it is delivered, the notebook is set to factory default settings. You can change these settings in BIOS Setup Utility. Any changes you make take effect as soon as you save and exit the BIOS Setup Utility.
Settings in BIOS Setup Utility Exiting BIOS Setup Utility BIOS SetupUtility You need to select the desired option in the Exit menu and activate it by pressing the Enter key: Exit Saving Changes – save changes and exit BIOS Setup Utility ► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes. The notebook is rebooted and the new settings come into effect.
Troubleshooting and tips Troubleshooting and tips Fault Tips Troubleshooting Follow the safety notes in the "Safety/Regulations" manual when connecting or disconnecting cables. If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: ► Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. ► Switch the notebook off. ► Please contact the Hotline/Service Desk.
Troubleshooting and tips Restoring the hard disk contents under Windows Operatingsystem,restoring Harddisk: You can use the "Windows Recovery CD" (optionally available) and the "Drivers & Utilities CD/DVD" to reinstall the operating system. The instructions are provided on the case of the Recovery CD. During the reinstall process your personal files and any installed programs will be deleted. We advise you to backup your files to an external hard drive, or CD / DVD disk before you start.
Troubleshooting and tips The notebook’s LCD screen remains blank LCDscreenistoodark LCDscreen Cause Monitor is switched off. External monitor or television set connected. Troubleshooting ► Press a key or touch the touchpad. ► Press the key combination to switch the screen output, see "Key combinations", Page 26. The LCD screen is difficult to read LCDscreen Cause Reflected glare Troubleshooting ► Turn the notebook or alter the tilt of the LCD screen. ► Increase the brightness of the screen.
Troubleshooting and tips The external monitor is blank or the image is unstable Monitor Screen Cause The wrong external monitor has been selected or the wrong screen resolution has been set for the application program. Troubleshooting ► Terminate the application program in Windows by pressing Alt + F4 . If the fault persists after closing the program, use the key combination for switching the screen output (see "Key combinations", Page 26) to switch over to the notebook’s LCD screen.
Troubleshooting and tips The notebook stops working Energysaving mode Notebook Cause Notebook is in energy saving mode. An application programme has caused the malfunction. The battery is dead. Troubleshooting ► Leave energy saving mode. ► Close the application program or restart the notebook (by restarting the operating system or switching the device off and back on again). ► Charge the battery. or ► Insert a charged battery. or ► Connect the mains adapter to the notebook.
Troubleshooting and tips Acoustic warnings Acoustic error messages Errors Cause A beep sounds every few seconds. Troubleshooting ► Charge the battery. The battery is almost flat. SmartCard reader is not recognised Cause Chip card inserted incorrectly. Troubleshooting ► Make sure you have inserted your SmartCard into the SmartCard reader with the chip facing upwards. ► Check whether the SmartCard you are using is supported. Your SmartCard must comply with the ISO standard 7816-1, -2, -3 and -4.
Troubleshooting and tips Error messages on the screen Error messages message: onthescreen This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programmes are described in the relevant documentation. If the error message appears repeatedly, despite troubleshooting measures, please contact the place of purchase or our customer service centre.
Troubleshooting and tips Error message/cause Resolution Previous boot incomplete - Default configuration ► Press the F1 function key when prompted used Due to an error during the previous system to do so. boot, default values were used for certain settings. Check the settings in the BIOS Setup. Real time clock error ► Contact your sales outlet or our customer service centre. nnnnK Shadow RAM failed at offset: xxxx Failing ► Contact your sales outlet or our customer Bits: zzzz service centre.
Technical data Technical data Technicaldata LIFEBOOK Technicaldata LIFEBOOK E733 Ambient conditions Operating temperature Temperature in transit Dimensions Width x depth x height Weight Main memory Slots Approved memory modules LIFEBOOK E743 LIFEBOOK E753 338 mm x 231 mm x 20–27 mm Approx. 1.9 kg 374 mm x 250 mm x 20–27 mm Approx. 2.1 kg 5 °C – 35 °C -15 °C ... 60 °C 321 mm x 228 mm x 20–27 mm Approx. 1.7 kg 2 slots 204-pin DDR3-1600 SO-DIMM with a total of max.
Technical data Mains adapter Technicaldata Electrical data Primary Rated voltage Rated frequency Secondary Rated voltage Max. rated current 65 W/80 W/100 W 100 V – 240 V (automatic) 50 Hz – 60 Hz (automatic) 19 V 3.42 A/4.22 A/5.27 A An additional mains adapter or power cable can be ordered at any time.
Manufacturer’s notes Manufacturer’s notes Disposal and recycling Notes You can find information on this subject on your notebook or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Declarations of Conformity Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx".
Index Index A A beep sounds every second 67 Acoustic error messages 71 Alt + Tab 27 Anti-theft protection 49 Application keys 28 Audio devices, connecting 59 Audio ports 59 B Back tab 27 Backspace 24 Bass loudspeaker (subwoofer) 41 Battery battery life 32 caring for and maintaining 32 charge level 32, 39 charging 32 self-discharge 32 storage 32 Battery indicator 21 Battery status indicator see Battery indicator 21 Battery status meter 32 Battery symbol see Battery indicator 21 BIOS Setup Utility calling 64
Index Fn+F8 Fn+F9 27 27 G Getting started 17 H Handling data carriers 35 Hard disk: restoring the contents 67 Hardware configuration 64 HDMI port 56 I Important notes 14 Incorrect date/time 67 Indicator Caps Lock 21 drive 21 Num Lock 21 Scroll Lock 21 Inserting a data carrier 36 K Key combinations 26 Keyboard 23 cleaning 16 keyboard backlight Activate 26 Deactivate 26 L LCD screen cleaning 16 decrease brightness 27 difficult to read 68 notes 30 reflected glare 68 remains blank 68 LCD screen is too dark
Index Numeric keypad 23 see Separate numeric keypad 26 see Virtual numeric keypad 25 O Operating system activating system protection 51 cancel system protection 51 protecting with password 51 Operating system, restoring 67 Optical drive 35 P Packaging 17 Password changing 50 entering 50 removing 51 Password protection 49 Peripheral devices connecting 54 disconnecting 54 Port Replicator Connecting a notebook 45 Ports 44 Ports Port Replicator 44 Power power consumption 39 power-management features Power-on i
Index Touchpad buttons 27 TPM 52 Transport Transport damage 17 Transportation 15–16 Travel, notebook 15 Troubleshooting 66 Trusted Platform Module 52 U USB charging function 58 USB ports 57 User password changing 50 entering 50 removing 51 Using the Kensington Lock Cable 80 V VGA connection socket 55 Virtual numeric keypad 25 Volume decrease 27 increase 27 Volume control 41 W Webcam 31 Weight Saver Removing 34 Windows key 24 Wireless LAN: safety notes 14 49 Fujitsu
