Operation Manual

Removing and installing components
during servicing
Installing a memory module
2
a
1
► Insert the memory module with the contacts
and the recess (a) facing the slot (1).
MemoryexpansionMemorymodule
► Carefully push the memory module
downwards until you feel it click
into place (2).
Attaching the cover
2
1
► Place the cover in the correct mounting position (1).
► Tighten the screw (2).
► Com plete the installation, s ee "
Finishin g c omponent removal", Page 63.
Finishing component removal
After you have removed or changed the system components as you required, please
prepare y our device for operation again as follows:
► Install the battery again (see "
Installing a battery", Page 33).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disco nnected before.
Fujitsu 63