Operation Manual

First-time setu p of your device
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 14.
If your device is equipped with a Windows operating system, the necessary
hardware drivers an d supplied software are already pre-installed.
Beforeyouswitchonthedeviceforthefirst time, connect it to the AC voltage
using the AC adapter, see "
AC adapter con necting", Page 19. The AC adapter
must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. T he display may remain dark for a s hort time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the ne cessary power. You
can increase the operating time by using the available energy-saving functions.
For i nstructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for you r device.
Unpacking and
checking the device
Should you discover a ny damage that occurred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTran sport
► Check your
device for any visible damage which may have occurred during transportation.
You may n e
ed the packaging in the future, if you need to transport your device.
18 Fujitsu