Operation Manual

First-time setup of yo ur device
Selecting a location
SelectingalocationDeviceACadapter
Select a suitable locat ion for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the AC adapter on a heat-sensitive surface.
The surface could be damaged as a resu lt.
• Never place the device on a soft s urfa ce (e.g. carpeting, upholstered furniture,
bed). T his can block the air vents and cau se overheating and damage.
• The underside of the device heats up during normal operation. Prolonged contact
with the skin may become unp leasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of th e device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm away from the device and its
AC adapter to ensure adequate v entilation.
• Never cover the ventilation slots of the device.
• Do not expose the device to extreme environ mental conditions. Protect
the device from dust, humidity, and heat.
AC adapter connecting
Preparingforo perationACadapter
Observe the safety notes in the enclosed "Safety/Regulations" m anual.
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
3
1
2
► Connect the power cable (1) to
the AC adapter.
► Plug the AC cable (2) into a power outlet.
► Connect the AC adapter cable (3) to the
DC jack (DC IN) of the device.
Fujitsu 19