Operation Manual

Working with the notebook
Connecting the AC adapter to the Port Replicator
3
1
2
► Connect the power cable to the
AC adapter (1).
► Plug the power cable into the power
outlet (2).
► Connect the AC ad apter cable to the DC
jack (DC IN) of the Port Replicator (3).
Power Outlets will vary from country to country, see chapter "When
travellin g in other countries ", Page 16.
When the notebook is connected to a Port Replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This pro file will be loaded, as
soon as the notebook is connected to a Port Replicator of the same type.
Switching on the notebook via the port replicator
► Press the Powe r ON/OFF button on the port
replicator to switch the notebook on.

The pow er-on indicator of the Port
Replicator lights up.
Fujitsu 51