Operation Manual

Working with the notebook
Optical drive
Opticaldrive
This product contains a light emitting diode, classification according to IEC 60825
1:2007: LASER C LASS 1, and must the refore not be opened.
Handling data carriers
Handling
Observe the following guidelines when handling data carriers:
• Avoid touching the surface of a data carrier. Only handle data carriers by their edges.
• Always store data carriers in their cases. This will protect the da ta carrier against
being covered in dust, scratched or damaged in any other way.
• Protect your data carriers against dust, mechanical vibrations and direct sunlight.
• Avoid storing a data carrier in areas subject to high temperatures or humidity.
You can use data carriers with a diameter of 8 cm / 3 .15" or 12 cm / 4.7" in the drive.
When using a data carrier of lesser quality, vibrations and reading errors may occur.
CD/DVD indicator
CD/DVDindicato
r
The CD/DVD indicator flashes when a data carrier is inserted. The indicato r goes out when
the drive is ready for reading. The indicator lights up when the drive is being accessed.
You may only remove the da ta carrier when the indicator is unlit.
If the CD /DVD indicator does not go out after a da ta carrier has been inserted, but
instead contin ues to flash, this means that the drive cannot acce ss the data carrier.
Either t he data carrier is damaged or dirty or you are using a data
carrier that the drive cannot read.
Fujitsu 37