Operation Manual

First-time setup of your d evice
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 13.
If your device is equipped with a Windows operating s ystem, the necessary
hardware drivers and supplied software are already pre-installed.
Beforeyouswitchonthedeviceforthefirst time, connect it to the mains voltage
using the mains adapter, see "
Mains adapter connecting", Page 18.Themains
adapter must be connected during the en tire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
On delivery, the battery can be found in the battery co mpartme nt or in the accessories kit.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in ba ttery provides the device with th e necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to conn ect external devices (e.g. mouse, printer) to your
device, please refer to the operating ma nual f or your device.
Unpacking and
checking the device
Should you discover any damage th at occurred during t ransportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
PackagingT ransport
► Check your
device for any visible damage which m ay have occurred during transportation.
You may ne
ed the packaging in the fu ture, if you need to transport your device.
Fujitsu 17