Operation Manual

First-time setup of your device
Selecting a location
SelectingalocationDeviceMains adapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a s oft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air v ents and cause overheating and damage.
• The und erside of the device heats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device m a y mark certain types of delicate surfaces.
• Keep other objects at least 100 mm away f rom the device and its
mains adapter to en sure adequate ventilation.
• Never cover the ventilation s lots of the device.
• Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
Preparingforo perationMainsadapter
Observe the safety notes in the en closed "Safety/Regulations" man ual.
The supplied power cable conforms to the requirements of the country in
which y ou purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
3
1
2
► Connect the power cable (1) to the
mains adapter.
► Plug the mains cable (2) into a mains outlet.
► Connect the mains adapter cable (3) to
the DC jack (DC IN) of the device.
18 Fujitsu