Operation Manual

First-time setup of your d evice
Switching on the device for the first time
Switchingonforthefirst time
On devices with ON/OFF switch for wireless components: Slide the ON/OFF switch
for wireless components to the ON position before switching on the device.
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you should se t aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use y
our device for the first time, the operating system
is pre-installed on th
e hard disk.
► Switch on your device.
► During installation, follow the instructions on screen.
If a Window s operating system is installed on your device, you will find more
information on the system and drivers, help progra mmes, updates, manuals etc. on
the device or on the Internet under "
http://www.fujitsu.com/fts/suppo r t/".
You can find information and help on the Windows operating system functions
on the Internet at "
http://window s.microsoft.com" .
Fujitsu 19