Operation Manual
Removing and installing components
during servicing
Installing a hard disk
2
1
► Place the hard disk
into the hard disk compartment (1).
► Use the pulling aid to pull the hard disk in the direction of the arrow (2) until the contacts engage.
Attaching the cover
1
2
2
► Place the cover in the correct mounting position (1).
If you remo ve more than one component at the s ame time, kee p the screws for the
individual components separately from each other and make sure that you use the
correct screws. If you install the wrong screws, components may be damaged.
► Tighten the s crews (2).
► Insert the battery (see Chapter "
Installing a battery" , Page 36).
78 Fujitsu