Operation Manual

Troubleshooting and tips
The notebook stops working
NotebookEnergys avingmode
Cause Troubleshooting
Notebook is in energy saving mo
de.
► Leave energy saving mode.
An application programme ha s
caused the
malfunction.
► Close the application program or restart
the notebook (by restarting th e operating
system or switching the device off and back
on again).
The battery is dead.
► Charge the battery.
or
► Insert a c harged battery.
or
► Connect the mains adapt
er to the
notebook.
The printer does not print
Printerdoesnot p
rint
Cause Troubleshooting
The printer is not switched on. ► Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
The printer is not connected correctly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The prin ter driver is faulty or not correctly
installed, or it is the wrong printer driver.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whethe
rthecorrectprinterdriveris
loaded (ref
er to the printer documentation).
The radio connection t o a network d oes not work
Theradi
oconnection toanetwo rkdoesnot work
Cause Troubleshooting
The wireless component is disabled.
► Switch the radio com ponent on (see
"
Switch ing th e wireless components on and
off", Page 50).
The wireless component is enabled. Despite
this, the wireless connection to a n etwork does
not work.
► Check whether the r adio connection is
switched on via the software.
► Furthe
r informa tion on using the radio
compo
nent can be found in the help files.
86 Fujitsu