Operation Manual

Important notes
Important notes
ImportantnotesNotes
This chapter contains essen tial safety information which must be followed
when wo rking with your notebook. Other note s also provide useful information
which will help you with your notebook.
Safety notes
SafetynotesNotes
Please note the information provided in the " Safety" manual and
in the following safety notes.
Please pay special attention to the sections in the manual marked
with the symbol on the left.
When connecting and disconn ecting cables, observe the relevant
notes in this operating manual.
Read the information on the amb ient conditions in the "
Technical da ta",
Page 89 and "First-time setup of yo ur device", Page 15 before preparing your
notebook for use and switching it on for the first time.
When cleaning the device, please observe the relevant notes in th e
section "
Clean ing the notebook", Page 14.
Pay attention t o the additional safety notes for devices with wireless
components provided in the "Safety" manual.
Please refer to the notes in the chapter "
Removing and installing
components during servicing", Page 72.
This notebook
complies with the relevant safety regulations for data processing
equipment. I
f y ou have questio ns about using your noteb ook in a particular area,
please conta
ct your sales outlet or our Hotline/Service Desk.
Additional safety notes for devices with
radio components
Radiocomponent :WirelessLAN:Bluetooth,safetynotes
If a radio component (Wireless LAN, B luetoot h, UMTS) is integrated in you r no tebook, you
must be sure to observe the following s afety notes when using your notebook:
• Switch off the radio c ompone nts when you are in an aircra ft or driving in a car.
• Switch off the radio comp onents when you are in a hospital, an operating room or nea r a m edical
electronics system. The transmitted radio waves can impair the operation of medical devices.
• Switch off the radio components when y ou let the device get near flammable
gases or into hazardous environments (e.g. petrol station, paintshops), as the
transmitted rad io waves can cause an explosion or a fire.
For information on how to sw itch radio components on and off, see chapter
"
Switching the wirele ss components on and off", Page 48.
12 Fujitsu Technology Solutions