Operation Manual

Working with the notebook
CD/DVD indicator
CD/DVDindicator
The CD/DVD indicator flashes when a data carrier is inserted. The indicator goes out when
the drive is ready for reading. The indicator lights up when the drive is being accessed.
You may only remove the data carrier when the indicator is unlit.
If the CD/DVD indicator does not go out after a data carrier h as been inserted, but
instead continues to flash, t his means that the drive cannot acce ss the data carrier.
Either t he dat a c arrier is damage d or dirty or you are using a data
carrier that the drive cannot read.
Inserting or removing a data carrier
InsertingRemoving
The notebook must be sw itched on.
2
1
► Push the insert/eject button (1).

The drive tray will open .
► Gently pull the drive tray (2) completely out.
► Place the data carrier in the drive tray with
the printed side fa cing upwards.
or
► Remove a data carrier that has
been inserted.
► Push in the drive tray until you
feel it lock into place.
Fujitsu Technology Solutions 37