Operation Manual

Working with the noteboo k
Removing the card
Always remove the card according to the rules described below, to
ensure that none of your data is lo st.
You can stop the card using the corresponding icon in the task bar:
► Left click on the icon to safely remove hardware, located in the taskbar.
► Select the card you want to stop and rem ove.
► Press the "Enter" key.

Wait for the dialog box which tells you that it is now safe to remove the card.
1
2
► If the eject button is lowered, you must
first cause the eject button to release
from the notebook casing. To do this,
press the eject but ton until it pops out.
Press the eject button (1) so that the card
protrudes a little from the notebook.
► Pull the card out of the slot ( 2).
► Insert the card placeholder into the
slot guide.
► Carefully slid
e the placeholder for the
card as far as it
will go into the slot.
Do not use exce
ssive force.
Loudspeakers and microphones
MicrophoneLoudspeakersBassloudspeak er(subwoofer)Volum ec ontro l
Information on the exact position of the speakers and microphone can be found
in "
Ports and operating elements", Page 9.
Please refer to chapter "
Key co mbinations", Page 25 for information on setting the volume
and also enabling/disabling the loudspe akers using key combinations.
If you attach an external microphone, the built-in microphone is disabled.
When you connect headphones or external speakers, the built-in speakers are disabled.
Information on connecting headphones and a micro phone can be found
in "
Connecting external de vices", Page 65.
44 Fujitsu Technology Solutions