Operation Manual

Security functions
Virus Warning (device-dependent)
This field checks the boot sectors of the hard disk drive to see if any changes have been
made since the previous system start-up. If the boot se ctor has bee n changed since the
previous system start-up (e.g. new operating system or virus attack), a warning is displayed
on the screen. T he warning will stay on the s creen until you acknowledge the changes by
clicking on Confirm or until you set the Virus Warning function to Disabled.
If the boot sectors have been changed and the reason for this is unknown, a
programme for finding computer viruses should be loaded.
Such a change is not only caused by viruses, but also by the boot manager.
This function does not replace proper anti-virus software.
No supervisor password is required to set it up.
► Call up the BIOS Setup and select the Security menu.
► Highlight the Virus Warning fie ld and press the Enter key.
► Select Enabled to activate the Virus Warning function.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.

The no tebook will restart and the settings will be adopte d.
SmartCard reader
Securityfunctions,Securityfunctions
Depending on the device configuration level, your notebook is equipped
with a SmartCa rd reader.
SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with
the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.
With the appropriate software you can use your SmartCard as an alternative to password protection,
but also as a digital signature, for encrypting your e-mails or for home banking.
We recom m end that you always use two SmartCards. Always keep one of the SmartCards
in a safe place if you are carrying the other SmartCa rd with you.
In order to be able to take advantag e of all the security features of your not ebook, you
will need a Ca rdO S SmartCard from Fujitsu Technology So lutions.
The SmartCard can only be used with a PIN, offering maximum protection even if
you lose the SmartCard. In order t o maximise your security, the CardOS SmartCard
is disabled if three incorrect attem pts are made to enter the PIN.
When you use the CardOS SmartCard for the first time, you will either need to enter the
preset PIN "12345678" or the PIN given to you by your systems administrator.
Fujitsu Technology Solutions 61