Operation Manual

Security functions
Inserting the SmartCard
Do not use force wh en inserting and removing the SmartCard.
Make sure that foreign objects do not fall into the SmartCard re ader.
► Slide the SmartCard into the SmartCard
reader with the chip facing upwards (on
some variants it faces down) and to the front.
SmartCard as soft
ware protection (SmartCase
™
Logon+)
Together with a CardOS SmartCard, software like SmartCase
™
Logon+ gives you the
option of logging on with the SmartCard and entering your PIN. If the PIN is entered
correctly, Smart Card is checked and the operating system is booted. The SmartCard must
remain in the SmartCard reader du ring the entire work session.
In addition, the software allows you to block your computer during breaks. This allows
you to leave your notebook unattended, without the risk of unauthorised pe rsons
being able to access your opened documents and data.
The settings for blocking access to the computer during a session are set up in
SmartCase
™
Logon+ under OS Logon (Smarty). Among other thing s, Smarty allows
you to specify how users should log on to the operating system, e.g.:
• Fingerprint (without a SmartCard)
• TPM with P
IN (without a SmartCard)
• Windows password
•SmartCar
d with PIN, with fingerprint or with PIN and fing erprint
To install, configure and use SmartCase
™
Logon+, please refer to the documentation
and online help on the CD with the SmartCase
™
Logon+ software.
Proceed as follows to block your c omputer when you want to take a break:
► Pull the SmartCard out of the notebook during your work session.

A window appears stating tha t the system is locked.
► When you want to continue with your work, insert the SmartCard and enter your PIN.

You will aut omatically return to your opened documents.
62 Fujitsu Technology Solutions