Operation Manual

Security functions
Setting supervisor and user password
► Start the BIOS Setup Utility and go to the Security menu.
► Select the Set Supervisor P assw ord field and press the Enter key.

With Enter new Password: y ou are asked to enter a password.
► Enter the password and press the Enter key.

Confirm new Password requires you to confirm t he password.
► Enter the password again and press the Enter key.

Changes have been saved is a confirmation that the new password has been saved.
► To set the user password, select Set User Password and proceed exactly as
when configuring th e supervisor password.

If you do not want to change any other settings, y ou can exit BIOS Setup Utility.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter k ey.
PasswordSupervisorpasswor
d
Userpassword

The notebo ok will be rebooted and the new password will come into effect. It will now be
necessary to first enter your supervisor or user password i n order to open the BIOS Setup Utility.
Please note that the user password only provides access to a few of the BIO S s ettings.
Changing the supervisor or user password
You can only change the supervisor password when you have logged into the
BIOS Se tup Utility with the supervisor passw ord.
PasswordSupervisorpasswordUser password
► Call the B IOS Setup Utility and go to the Security menu.
► When changing th e passw ord, proceed exactly as for p assword assignment.
Removing passwords
To remove a password (without setting a new password) perform the following steps:
PasswordSupervisor
password
Userpasswo
rd
► Start the BIOS Setup Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and press the Enter key.

You will be requested to enter the current password by the Enter Current Password prompt.
You will be requested to enter a new password by the Enter New Password prompt.
► Press the Enter key twice.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter k ey.

The not ebook will now reboot with the passw ord rem ove d.
Removing the supervisor password simultaneously de activates the user password.
Passw
ord protection for booting of the operating system
With the supervisor password y ou have set in the BIO S Se tup U tility (see
section "
Setting supervisor and user passw ord", Page 55), you can also
prevent booting of the operating system.
Operating system
Fujitsu Technology Solutions 55