Operation Manual

Removing and installing components
during servicing
Attaching the cover
2
1
2
2
2
2
3
► Place th e cover in the correct mounting position (1).
► Secure the scre
ws for the cover of the hard disk service compartment (2).
► Secure the screw for the cover of the memory service compartme nt (3).
► Insert the bat
tery (see Chapter "
Insertin g battery", Page 31).
Finishing component removal
After y ou have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery ag ain (see "
Insertin g battery " , Page 3 1).
► Turn the n
otebook the right way up ag ain and place it on a flat surface.
► Reconnect the cables that you disconn ecte d before.
58 Fujitsu