Operation Manual

Ports and o perating elements
Connecting the notebook to the Port Replicator
The mains a dapter must be connected to the Port Replicator when the notebook is
connected to the Port Replicator. Some ports will not function if this is not done.
We recommend that the notebook is not operated with the L CD screen
closed whe n the notebook is connected to the Port Replicator. The resulting
overheating can lead to a loss of performance.
PortReplicator
► Position the notebook so that the docking port on the underside of the no tebook
is aligned with the conn ecto r on the Port Replicator.
► Press down gently on the r ear cor
ners of the no tebook so that it locks into position.
Disconnecting the notebo ok from the Port Replicator
Problems may occur if the notebook is removed from the Port Replicator during
operation. We recommend that the notebook is switched off or that the appropriate
undocking function pro vided by the operating system is executed.
► Pull the release lever on the right hand side of the Port Replicator until
you hear the notebook unlock.
► Now lift the notebook from the Port Replicator.
A26391-K212-Z220-1-7619 , edition 1 21