System Operating Manual LIFEBOOK P701
Congratulations, you have decided to buy an innovative Fujitsu product. The latest information about our products, useful tips, updates etc. is available from our website: "http://ts.fujitsu.com" For automatic driver updates, go to: "http://support.ts.fujitsu.com/com/support/index.html" Should you have any technical questions, please contact: • our Hotline/Service Desk (see Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.
Copyright Fujitsu Technology Solutions 04/12 Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 (Mies-van-der-Rohe Street No. 8) 80807 Munich, Germany Contact http://ts.fujitsu.com/support All rights reserved, including intellectual property rights. Subject to technical alterations. Delivery subject to availability. No warranty is offered or liability accepted in regard of the completeness, correctness, or current applicability of any data or illustrations.
LIFEBOOK P701 Operating Manual Innovative technology 7 Ports and controls 9 Important notes 12 First-time setup of your device 15 Working with the notebook 18 Security functions 48 Connecting external devices 54 Removing and installing components during servicing 61 Settings in BIOS Setup Utility 69 Troubleshooting and tips 71 Technical data 78 Manufacturer’s notes 79 Index 80
Microsoft, MS, Windows XP and Windows 7 are registered trademarks of the Microsoft Corporation. Adobe Reader is a trademark of Adobe Systems Incorporated. MultiMediaCard is a registered trademark of Infineon Technologies AG Sony and Memory Stick are registered trademarks of Sony Electronics, Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged.
Contents Contents Innovative technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents ExpressCards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing the card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loudspeakers and microphones . . . . .
Contents Installing a hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Finishing component removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 68 68 Settings in BIOS Setup Utility . . . .
Contents 6 Fujitsu Technology Solutions
Innovative technology Innovative technology ... and ergonomic design make your device a reliable and convenient companion. The device boots very quickly, is ready for immediate use and offers a particularly long operating time because of its high capacity battery. With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better protect your system against unauthorised access by using the powerful password properties.
Innovative technology Notational conventions Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information for the proper use of the device.
Ports and controls Ports and controls This chapter presents the individual hardware components of your device. It gives an overview of the indicators and ports of the device. Please familiarise yourself with these components before you start to work with the device.
Ports and controls Left side 1 3 2 1 = DC input connector (DC IN) 2 = LAN port 3 = Kensington lock device 4 5 6 4 = USB port 5 = SmartCard reader 6 = Memory card reader Right side 1 1 2 3 4 10 = = = = ExpressCard slot DisplayPort USB port USB port 2 3 4 5 6 7 5 = Headphone port 6 = Microphone port 7 = Monitor port (VGA) Fujitsu Technology Solutions
Ports and controls Bottom 2 1 3 5 4 6 1 = Battery release 2 = Memory service compartment 3 = Hard disk service compartment Fujitsu Technology Solutions 4 = Rechargeable battery 5 = Port Replicator port 6 = Battery release 11
Important notes Important notes Notes Importantnotes This chapter contains essential safety information which must be followed when working with your notebook. Other notes also provide useful information which will help you with your notebook. Safety notes Notes Safetynotes Please follow the safety notes provided in the "Safety/Regulations" manual as well as the safety notes given below. Please pay special attention to the sections in the manual marked with the symbol on the left.
Important notes Energy saving Energysaving Energy Notes Switch the notebook off when it is not in use. Switch off external, connected devices if you are not using them. If you use the energy saving functions, the notebook uses less energy. You will then be able to work for longer before having to recharge the battery. Energy efficiency is increased and the environmental impact is reduced. You save money while protecting the environment.
Important notes Notebook: transporting Protect the notebook from severe shocks and extreme temperatures (e.g. direct sunlight in a car). ► ► ► ► ► ► If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives. Switch the notebook off. Unplug the mains adapter and all external devices from the power socket. Disconnect the mains adapter cable and the data cables for all external devices. Close the LCD screen.
First-time setup of your device First-time setup of your device Gettingstarted First-timesetup Please read the chapter "Important notes", Page 12. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before you switch on the device for the first time, connect it to the mains voltage using the mains adapter, see "Mains adapter connecting", Page 16.
First-time setup of your device Selecting a location Selectinga location Mainsadapter Device Select a suitable location for the device before setting it up. Follow the instructions below when doing so: • Never place the device or the mains adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can block the air vents and cause overheating and damage.
First-time setup of your device Switching on the device for the first time Switchingon for thefirsttime On devices with ON/OFF switch for wireless components: Slide the ON/OFF switch for wireless components to the ON position before switching on the device. When you switch on the device for the first time, the supplied software is installed and configured.
Working with the notebook Working with the notebook Notebook Notebook,operation This chapter describes the basics for operating your notebook. Please read the chapter entitled "Connecting external devices", Page 54 for instructions on how to connect devices such as a mouse and a printer to the notebook. Please refer to the notes in "Important notes", Page 12.
Working with the notebook Key Description Power-on indicator/standby (status indicator and ON/OFF switch) • Indicator is illuminated: The notebook is switched on. • Indicator flashes: The notebook is in standby mode. • Indicator is off: The notebook is switched off. Power-onindicator Standbyindicator Batter charging indicator / Mains connection The state of charge of the battery is shown by the battery indicator.
Working with the notebook Switching on the notebook ► Open the LCD screen. Switching on ► Press the ON/OFF switch for about one second to switch the notebook on. The power-on indicator is lit. Notebook: switching off Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system properly (e. g. from the Windows Start menu, by clicking on Start – Shut Down – OK).
Working with the notebook Keyboard Keyboardkeypad Numeric Buttons The keyboard of your notebook is subject to continuous wear through normal use. The key markings are especially prone to wear. The key markings are liable to wear away over the life of the notebook. The keyboard has been designed to provide all the functions of an enhanced keyboard. Some enhanced keyboard functions are mapped with key combinations. The following description of keys refers to Windows.
Working with the notebook Key Description Backspace key The Backspace key deletes the character to the left of the cursor. Backspace Tab key The Tab key moves the cursor to the next tab stop. Tabkey Enter key (return) The Enter key terminates a command line. The command you have entered is executed when you press this key. Linefeed Enter Return Enterkey Caps Lock key The Caps Lock key activates the Caps Lock mode, and the corresponding icon is displayed in the Windows information area.
Working with the notebook Virtual numeric keypad Numeric Num Virtualnumerickeypad Lock keypad To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers and symbols printed in the upper right corner of each key. If you have switched on the virtual numeric keypad, you can output the characters shown on the upper right of the keys.
Working with the notebook Combination Description Switching the touchpad and touchpad buttons on/off This key combination switches the touchpad and the touchpad buttons on or off. Touchpadbuttons Fn+F4 Touchpad Decrease screen brightness This key combination decreases the brightness of the screen. Screenbrightness LCDscreen Fn+F6 Increase screen brightness This key combination increases the brightness of the screen.
Working with the notebook Country and keyboard settings If you want to change the country and keyboard settings, proceed as follows: ► Enter the settings by clicking Start – (Settings) – Control Panel – Time, Regional and Language Options. Application keys Applicationkeys Your notebook is equipped with five application keys. All application buttons are freely programmable, see "Programming the application keys", Page 26.
Working with the notebook Button Description Lock Workstation key This key allows you to lock your workstation. Mobility Center key This button starts the Mobility Center. E key The E key is a simple way of activating and deactivating power management functions (e.g. reduce screen brightness), see "Using the power-management features", Page 36. I key With the I key, you can obtain further information about your notebook.
Working with the notebook Touchpad and touchpad buttons Keep the touchpad clean. Protect it from dirt, liquids and grease. Touchpad Do not use the touchpad if your fingers are dirty. Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons. 1 1 = Touchpad 2 2 = Fingerprint sensor 3 = Touchpad buttons 3 The touchpad enables you to move the mouse pointer on the screen. The touchpad buttons allow you to select and execute commands.
Working with the notebook Dragging items ► Select the desired item. ► Press and hold the left button and drag the item to the desired position with the finger on the touchpad. The item will be moved. Touchpad ScrollWheel The ScrollWheel (1) is an innovative and extremely convenient control. The ScrollWheel allows you to scroll up or down in the active window (e.g. on a website) or forwards and backwards in a document with a single finger movement.
Working with the notebook Scrolling downwards or forwards ► Move the cursor to the window you wish to select. ► Move your finger clockwise on the ScrollWheel. You will scroll downwards or forwards. Scrolling upwards or backwards ► Move the cursor to the window you wish to select. ► Move your finger anticlockwise on the ScrollWheel. You will scroll upwards or backwards. Back one page in Web browser ► Tap the centre of the ScrollWheel. The Web browser returns to the previous page displayed.
Working with the notebook LCD screen Notes LCDscreen High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. For technical reasons, TFT monitors are manufactured for a specific resolution. An optimal, clear picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A monitor resolution which differs from the specification can result in an unclear picture.
Working with the notebook Webcam Webcam Depending on the software used, you can use your Webcam to take pictures, record video clips or take part in web chats. • • • • The picture quality depends on the lighting conditions and the software being used. You can only operate the webcam with a particular application (e.g. an Internet telephony program or a video conferencing program which supports a webcam). When using the webcam the notebook support must not wobble.
Working with the notebook Charging, caring for and maintaining the battery Battery The notebook battery can only be charged, when the ambient temperature is between 5°C and max. 35°C. You can charge the battery by connecting the notebook to the mains adapter (see "Mains adapter connecting", Page 16). If the battery is running low you will hear a warning alarm. If you do not connect the mains adapter within five minutes of the warning alarm described above, your notebook will automatically switch off.
Working with the notebook Removing a battery ► Prepare for removal, see chapter "Preparing to remove components", Page 62. 1 3 2 ► Slide the release button in the direction of the arrow (1) and hold it in place. ► Slide the release button in direction of the arrow (2). ► Remove the battery from the battery compartment (3).
Working with the notebook Installing a battery 1 2 ► ► ► ► Position the battery at the edge. Insert the battery into the battery compartment until it engages positively (1). Slide the release button in the direction of the arrow (2). Complete the removal, see chapter "Finishing component removal", Page 68.
Working with the notebook ► Press and hold the lock of the ventilation slot cover (1) and remove it from its slot (2). ► Clean the dust chamber. 1 2 1 Fujitsu Technology Solutions ► Insert the ventilation slot cover into the slot (1) at an angle as shown, and ensure that you feel it click into place. ► Complete the removal, see chapter "Finishing component removal", Page 68.
Working with the notebook Using the power-management features Power Battery The notebook uses less power when the available power-management features are used. You will then be able to work longer when using the battery before having to recharge it. Power efficiency is increased and environmental pollution reduced. By choosing the best power options, you can make significant savings and at the same time help protect the environment.
Working with the notebook Memory cards Slot Your notebook is equipped with an integrated memory card reader. Observe the manufacturer’s instructions when handling the memory cards. Memory card Supported formats Your notebook supports the following format: • Secure Digital (SDTM card) Inserting the memory card ► Carefully slide the memory card into the slot. The label should be facing upward. Do not apply excessive force, as otherwise the delicate contact surfaces could be damaged.
Working with the notebook Removing the memory card Memorycard In order to protect your data, always follow the correct procedure for removing the card outlined below. You can stop the memory card via the corresponding icon in the task bar: ► Left-click on the icon. ► Select the card you want to stop and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the memory card. ► On devices with card locking: Press on the storage card (1).
Working with the notebook Inserting the card Keep the placeholder for the slot in a safe place. When you remove the card again, you must reinstall the place holder. This prevents foreign objects from getting into the slot. ► Press the edge of the placeholder (1) to make the card placeholder protrude from the notebook’s case. ► Pull the card placeholder out of the slot (2). 1 2 ► Insert the card into the slot guide with the connection contacts first.
Working with the notebook Removing the card Always remove the card according to the rules described below, to ensure that none of your data is lost. You can stop the ExpressCard using the corresponding symbol in the task bar: ► Click on the symbol for safe removal of hardware with the left mouse button. ► Select the ExpressCard you want to stop and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the ExpressCard.
Working with the notebook SIM card A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or notebook to enable access to a mobile radio network in conjunction with an installed UMTS module. Follow the instructions supplied by the provider of the SIM card. The SIM card slot is located in the battery compartment and can only be accessed when the battery is removed.
Working with the notebook Switching the wireless components on and off Before switching on your device for the first time, the on/off switch for wireless components must be in the "ON" position. ► Slide the ON/OFF switch into the "ON" position to activate the wireless components. or ► Slide the ON/OFF switch to the "OFF" position to deactivate the wireless components.
Working with the notebook Access via UMTS You can purchase the accessories for UMTS reception from your retailer or your Fujitsu Technology Solutions dealer. If you have ordered a UMTS module, your device will already be prepared when you receive it. You will find information on establishing the connection with the UMTS network in the documentation for the hardware used. Your device can connect with the Internet via UMTS.
Working with the notebook Ports on the Port Replicator Ports PortReplicator 8 1 2 3 9 4 5 1 6 7 1 2 3 4 5 6 = = = = = = USB ports e-SATA port LAN port DVI port VGA monitor port Kensington Lock 7 = DC input connector (DC IN) 8 = Connector on the Port Replicator for the docking port on the underside of the notebook 9 = DisplayPort The DVI port and DisplayPort cannot be used at the same time.
Working with the notebook Connecting the notebook to the Port Replicator If you connect the notebook to the Port Replicator during operation, problems can occur. We recommend that you switch off the notebook beforehand. The mains adapter must be connected to the Port Replicator when the notebook is connected to the Port Replicator. We recommend that the notebook is not operated with the LCD screen closed when the notebook is connected to the Port Replicator.
Working with the notebook Connecting the mains adapter to the Port Replicator ► Connect the mains adapter cable to the DC jack (DC IN) of the Port Replicator (1). ► Connect the power cable to the mains adapter (2). ► Plug the power cable into the mains socket (3). 1 3 2 When the notebook is connected to a Port Replicator, the operating system creates a hardware profile for the "Docked" mode. In this profile, for example, the setting is saved as to which monitor was last used for output.
Working with the notebook Disconnecting the notebook from the Port Replicator Problems may occur if the notebook is removed from the Port Replicator during operation. We recommend that the notebook is switched off or that the appropriate undocking function provided by the operating system is executed. ► Switch the notebook off. 2 1 ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2).
Security functions Security functions Securityfunctions Your notebook has several security features that you can use to secure your system from unauthorised access. This chapter explains how to use each function, and what the benefits are. Please remember that in some cases, for example, forgetting your password, you may be locked out and unable to access your data.
Security functions Use Kensington Lock Your device comes with a Kensington Lock device for the Kensington MicroSaver. With the Kensington MicroSaver, a sturdy steel cable, you can help protect your notebook from theft. The Kensington MicroSaver is available as an accessory. ► Fit the Kensington MicroSaver on the device on your notebook.
Security functions Setting supervisor and user password ► Start the BIOS Setup Utility and go to the Security menu. ► Select the Set Supervisor Password field and press the Enter key. With Enter new Password: you are asked to enter a password. ► Enter the password and press the Enter key. Confirm new Password requires you to confirm the password. ► Enter the password again and press the Enter key. Changes have been saved is a confirmation that the new password has been saved.
Security functions Password protection for booting of the operating system With the supervisor password you have set in the BIOS Setup Utility (see section "Setting supervisor and user password", Page 50), you can also prevent booting of the operating system. Operating system Activating system protection ► ► ► ► Start the BIOS Setup Utility and go to the Security menu. Select the Password on Boot option and press the Enter key.
Security functions SmartCard reader Securityfunctions Securityfunctions, SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers. With the appropriate software you can use your SmartCard as an alternative to password protection, but also as a digital signature, for encrypting your e-mails or for home banking. We recommend that you always use two SmartCards.
Security functions Trusted Platform Module (TPM) (device-dependent) Trusted Platform Module TPM To use the TPM, you must activate the TPM in the BIOS Setup before the software is installed. The condition for this is that you have assigned at least the supervisor password (see "Security functions", Page 48). Enabling TPM • ► ► ► Requirement: You have assigned a supervisor password, see "Security functions", Page 48. Call up the BIOS Setup and select the Security menu.
Connecting external devices Connecting external devices Always refer to the safety information provided in "Important notes", Page 12 before connecting or disconnecting any devices to or from your notebook. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug.
Connecting external devices Connecting an external monitor The notebook itself does not have a DVI port. The optional Port Replicator available for your notebook provides this port. An analogue monitor is connected to the analogue VGA monitor port, a digital monitor to the DVI monitor port. Screen output is limited to a maximum of two screens at any one time (see "Key combinations", Page 23, section "Toggle output screen").
Connecting external devices Connecting an external monitor to the DisplayPort It is possible to connect a digital monitor to the DisplayPort. Screen output is limited to a maximum of two screens at any one time (see "Key combinations", Page 23, section "Toggle output screen"). Digital DisplayPort ► Switch off the notebook and the external monitor. ► Plug the data cable of the external monitor into the monitor port. ► First switch on the external monitor and then the notebook.
Connecting external devices Connecting USB devices USBports On the USB ports, you can connect external devices that also have a USB port (e.g. a DVD drive, a printer, a scanner or a modem). USB devices are hot-pluggable. This means you can connect and disconnect devices while your operating system is running. USB 1.x has a maximum data transfer rate of 12 Mbit/s. USB 2.x has a data transfer rate of up to 480 Mbit/s. Additional information can be found in the documentation for the USB devices.
Connecting external devices USB port with charging function USBchargingfunction It is recommended that the notebook be operated with the power supply connected whenever the USB port with charging function is in use, as this function will drain the battery more quickly if an external USB device is being charged. The power supply unit must already be connected when the notebook is switched off, as otherwise the USB charging function will be disabled and the connected USB devices will not be charged.
Connecting external devices Connecting an external SATA hard disk (eSATA) An external SATA hard disk can be connected at the eSATA port. This allows you to expand the internal hard disk capacity as you wish. The length of the eSATA cable must not exceed 2 metres. Consult a specialist dealer for advice on which eSATA data cable is suitable for your external eSATA hard disk. Make sure that the hard disk has its own external power supply. The data transfer rate is up to 2,400 Mbit/s.
Connecting external devices Connecting external audio devices Microphone port/Line In Microphone,connecting Audioports Audiodevices,connecting The microphone port/Line In allows you to connect an external microphone, a MiniDisc player, MP3 player, CD player or a tape deck to your notebook. ► Connect the audio cable to the external device. ► Connect the audio cable to the microphone port/Line In of the notebook.
Removing and installing components during servicing Removing and installing components during servicing Only qualified technicians should repair your notebook. Unauthorised opening or incorrect repair may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty. Servicing Components After consulting the Hotline/Service Desk, you may remove and install the components described in this chapter yourself.
Removing and installing components during servicing Preparing to remove components If you are going to remove or change system components, prepare for the removal as follows: Please observe the safety information in chapter "Important notes", Page 12. Remove the power plug from the mains outlet ! ► Switch the device off. The device must not be in energy-saving mode ! ► Close the LCD screen. ► Remove all the cables from the device. ► Turn the device over and place it on a stable, flat and clean surface.
Removing and installing components during servicing Removing a cover 1 2 ► Remove the screw (1). Keep the screws in a safe place. If you are removing more than one component at the same time, store the screws for the individual components separate from each other. If you install the wrong screws, components may be damaged. ► Lift the cover off the notebook (2). Removing memory modules ► Carefully push the two mounting clips outwards (1). The memory module snaps upwards (2).
Removing and installing components during servicing Installing a memory module ► Insert the memory module with the contacts and the recess (a) facing the slot (1). ► Carefully push the memory module downwards until you feel it click into place (2). Memory module expansion 1 2 a Attaching the cover 2 1 ► Place the cover in the correct mounting position (1).
Removing and installing components during servicing Removing and installing the hard disk Removing a cover 1 1 2 ► Remove the screws (1). Keep the screws in a safe place. If you are removing more than one component at the same time, store the screws for the individual components separate from each other. If you install the wrong screws, components may be damaged. ► Lift the cover off the notebook (2).
Removing and installing components during servicing Removing a hard disk ► Lift the hard disk out of the service compartment in the direction of the arrow. Ensure that the contacts disengage.
Removing and installing components during servicing Installing a hard disk ► Place the hard disk into the service compartment. Ensure that the contacts engage.
Removing and installing components during servicing Attaching the cover 2 2 1 ► Place the cover in the correct mounting position (1). ► Fasten the screws (2). Finishing component removal After you have removed or changed the system components as you required, please prepare your device for operation again as follows: ► Install the battery again (see "Installing a battery", Page 34). ► Turn the notebook the right way up again and place it on a flat surface.
Settings in BIOS Setup Utility Settings in BIOS Setup Utility System Setup Hardwareconfiguration BIOS SetupUtility Configuration,BIOSSetupUtility configuration settings,BIOSSetupUtility The BIOS Setup Utility allows you to set the system functions and the hardware configuration for the notebook. When it is delivered, the notebook is set to factory default settings. You can change these settings in BIOS Setup Utility. Any changes you make take effect as soon as you save and exit the BIOS Setup Utility.
Settings in BIOS Setup Utility Exiting BIOS Setup Utility BIOS SetupUtility You need to select the desired option in the Exit menu and activate it by pressing the Enter key: Exit Saving Changes - save changes and exit BIOS Setup Utility ► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes. The notebook is rebooted and the new settings come into effect.
Troubleshooting and tips Troubleshooting and tips Fault Tips Troubleshooting Follow the safety notes in the "Safety/Regulations" manual when connecting or disconnecting cables. If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: ► Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. ► Switch the notebook off. ► Please contact the Hotline/Service Desk.
Troubleshooting and tips Restoring the hard disk contents under Windows Operatingsystem,restoring Harddisk: You can use the "Windows Recovery CD" (optionally available) and the "Drivers & Utilities CD/DVD" to reinstall the operating system. The instructions are provided on the case of the Recovery CD. During the reinstall process your personal files and any installed programs will be deleted. We advise you to backup your files to an external hard drive, or CD / DVD disk before you start.
Troubleshooting and tips The notebook’s LCD screen remains blank LCDscreenistoodark LCDscreen Cause Monitor is switched off. External monitor or television set connected. Troubleshooting ► Press a key or touch the touchpad. ► Press the key combination to switch the screen output, see "Key combinations", Page 23. The LCD screen is difficult to read LCDscreen Cause Reflected glare Troubleshooting ► Turn the notebook or alter the tilt of the LCD screen. ► Increase the brightness of the screen.
Troubleshooting and tips The external monitor is blank or the image is unstable Monitor Screen Cause The wrong external monitor has been selected or the wrong screen resolution has been set for the application program. Troubleshooting ► Terminate the application program in Windows by pressing Alt + F4 . If the fault persists after closing the program, use the key combination for switching the screen output (see "Key combinations", Page 23) to switch over to the notebook’s LCD screen.
Troubleshooting and tips The notebook stops working Energysaving mode Notebook Cause Notebook is in energy saving mode. An application programme has caused the malfunction. The battery is dead. Troubleshooting ► Leave energy saving mode. ► Close the application program or restart the notebook (by restarting the operating system or switching the device off and back on again). ► Charge the battery. or ► Insert a charged battery. or ► Connect the mains adapter to the notebook.
Troubleshooting and tips Acoustic warnings Acoustic error messages Errors Cause A beep sounds every few seconds. Troubleshooting ► Charge the battery. The battery is almost flat. Error messages on the screen Error messages message: onthescreen This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programmes are described in the relevant documentation.
Troubleshooting and tips Error message/cause Operating system not found Press to resume, to SETUP Resolution ► Check in the BIOS Setup whether your hard disk has been set correctly. ► Make sure that the operating system is installed on the corresponding drive. ► Press the F1 function key to start the operating system. ► Press the function key F2 to access the BIOS Setup. This error message appears if an error occurs during the self-test before starting the operating system.
Technical data Technical data Technicaldata LIFEBOOK Technicaldata Ambient conditions Operating temperature Dimensions Width x depth x height Weight Main memory Slots 5 °C – 35 °C 283 mm x 215 mm x 26.2–33.3 mm Approx. 1.5 kg 2 slots 204-pin DDR3-1333 SO-DIMM with a max. total of 8 Gbyte RAM 2 Gbyte or 2 Gbyte DDR3-1333 SO-DIMM Approved memory modules The data sheet for the device provides further technical data. You will find the data sheet on your device or on the Internet at "http://ts.fujitsu.
Manufacturer’s notes Manufacturer’s notes Disposal and recycling Notes Information about this subject can be found on your notebook or on our Internet pages. Declarations of Conformity Declarationofconformity The "Declarations of Conformity" for the device can be found at our Internet address under: "http://ts.fujitsu.com/ce". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Index Index Connecting headphones 60 Crystal View display cleaning 14 Ctrl+Alt+Del 24 Cursor control keys 22 Cursor keys 22 A A beep sounds every second 72 Acoustic error messages 76 Alt+Tab 24 Anti-theft protection 49 Application keys 25 Audio devices, connecting 60 Audio ports 60 B Back tab 24 Backspace 22 Bass loudspeaker (subwoofer) 40 Battery battery life 31 caring for and maintaining 32 charge level 32, 36 charging 32 self-discharge 32 storage 32 Battery indicator 19 Battery status indicator see Bat
Index G Getting started 15 H Hard disk: restoring the contents 72 Hardware configuration 69 I Important notes 12 Incorrect date/time 72 Indicator Caps Lock 19 drive 19 Num Lock 19 Scroll Lock 19 K Kensington MicroSaver Key combinations 23 Keyboard 21 cleaning 14 49 L LCD screen cleaning 14 decrease brightness 24 difficult to read 73 notes 30 reflected glare 73 remains blank 73 LCD screen is too dark 73 Life, battery 31 Line feed 22 Loudspeakers 40 switch off 23 switch on 23 M Main memory see Adding mem
Index Peripheral devices connecting 54 disconnecting 54 Port Replicator Connecting a notebook 45 Ports 44 Ports Port Replicator 44 Power power consumption 36 power-management features Power-on indicator 19 Preparing for operation 16 Printer does not print 75 36 R Radio component: safety notes 12 Rechargeable battery 31 see Battery 31 Removing memory see Adding memory 62 Return 22 S Safety notes 12 Screen no screen display 74 Screen brightness decrease 24 increase 24 Screen port see VGA connection socket
Index V VGA connection socket 55 Virtual numeric keypad 23 Volume decrease 24 increase 24 Volume control 40 W Webcam Wireless LAN Switching off 42 Switching on 42 Wireless LAN: safety notes 12 31 Fujitsu Technology Solutions 83