Operation Manual

Important notes
Important notes
ImportantnotesNotes
This chapter contains essen tial safety information which must be followed
when working with your notebook. Other note s also provide useful information
which will help you with your notebook.
Safety notes
SafetynotesNotes
Please follow the safety n otes provided in the "Safety/Regu lations" manua l
as well as the safety notes given below.
Please pay special attention to the sections in the ma nual marked
with the symbol on the left.
When connecting and disconn ecting cables, observe the relevant
notes in this operating manual.
Read the information on the ambient conditions in the "
Technical da ta",
Page 78 and "First-time setup of your de vice", Page 15 before preparing you r
notebook for use and switching it on for the first time.
When cleaning the device, please observe the relevant notes in th e
section "
Clean ing the notebook", Page 14.
Pay attention to the additional safe ty notes for devices with radio components
provided in the "Safety/R egulatio ns" manua l.
Please refer to the notes in the chapter "
Removing and installing
components during servicing", Page 61.
This notebook
complies with the relevant safety regulations for data processing
equipment. I
f you have questions about using your notebook in a particular area,
please conta
ct your sales outlet or our Hotline/Service Desk.
Additional safety notes for devices with
radio components
Radiocomponent :WirelessLAN:Bluetooth,safetynotes
If a radio component (Wireless LAN, Bluetooth, UMTS) is integrated in your no tebook, you
must be sure to observe the following safety notes when using y our notebook:
• Switch off the radio components when you are in an aircraft or driving in a car.
• Switch off the radio components when you are in a hospital, an operating room or near a medical
electronics system. The transmitted radio waves can impair the operation of medical devices.
• Switch off the radio components when you let the device ge t ne ar flammable
gases or into hazardous environments (e.g. p etrol station, paintshops), as the
transmitted rad io waves can cause an explosion or a fire.
For information on how to sw itch radio compo nents o n and off, see chapter
"
Switching the wireless compone nts on and off", Page 42.
12 Fujitsu Technology Solutions