Operation Manual

Security functions
Setting supervisor and user password
► Start the BIOS Se tup Utility and go to the Security menu.
► Select the Set Supervisor Password field and press the Enter key.

With Enter new Password: you are asked to enter a password.
► Enter the password and press the Enter key.

Confirm ne w Password requires you to confirm the password.
► Enter the password again and press the Enter k ey.

Changes have been saved is a confirmation that the new password has been saved.
► To set the user password, select Set User Password and proceed exactly as
when configuring the supervisor password.

If you do not want to change any other settings, you can exit BIOS Setup Utility.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter k ey.
PasswordSupervisorpasswor
d
Userpassword

The n otebook will be rebooted an d the new password will come into effect. It will now be
necessary to first enter your supervisor or user password in order to open the BIO S Setup U tility.
Please note that the user password only provides access to a few of the BIOS settings.
Changing the supervi so r or use r pas sw o rd
You can only change the s upervisor password when you have logged into the
BIOS Setup Utility with the supervisor password.
PasswordSupervisorpasswordUser password
► Call the BIOS Setup U tility andgototheSecurity menu.
► When ch anging the password, proceed exactly as for password assignment.
Removing passwords
To remove a passw ord (without setting a new password) perform the following steps:
PasswordSupervisor
password
Userpasswo
rd
► Start the BIOS Se tup Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and press the Enter key.

You will be requested to enter the current password by the Enter Current Password prompt.
You will be requested to enter a new password by the Enter New Password prompt.
► Press the Enter key twice.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter k ey.

The notebook will now reboot with the password removed.
Removing the supervisor password simultaneously deactivates the user passw ord.
50 Fujitsu Technology Solutions