User manual

Troubleshooting and tips
Error message/cause Resolution
Previous boot incomplete - Default configuration
used Due to an error during the previous system
boot, default values were used for certain
settings. Check the settings in the BIOS Set up.
► Press the
F1
function key when prom
pted
to do so.
Real time clock er ror
► Contact your sales outlet or
our customer
service centre.
nnnnK Shadow RAM failed a
t offset: xxxx Fa ilin g
Bits: zzzz
► Contact your sales outlet or our customer
service centre.
System battery is dead - Replace and run SETUP
► Contact your sales outlet or our customer
service centre.
System cache error - Cache disabled
► Contact your sales out
let or our customer
service centre.
System time r error
► Contact your sales outlet or our customer
service centre.
Restoring the contents of the hard disk
under Windows
Restoring the system under Windows 10
If necessary,
you can reset your system to the original state of th e hard disk.
► Beginning at
the right e dge of the Windows Start screen or the desktop, use a
finger to swee
p over the screen to open the Action Centre.
► Select A ll settings.
► Select Upda
te & security .
► Select Recovery.
► Select acc
ording to your re quirements from the options given.
98 Fujitsu