User manual

Removing and installing components
during servicing
Preparing to remove components
If you are going to re move or change system components, prepare for the removal as follows:
Please observe the safety information in chapter "Im portant notes", Page 12.
Remove the power plug from the mains outlet !
► Switch the device off.
The device must not be in energy-saving mode !
► Close the LCD screen.
► Remove all the cables
from t he device.
► Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an
anti-slip cloth on this surface to prevent the device from being scratched.
► Re m ove the battery
(see "
Removing the battery", Page 48).
78 Fujitsu