User manual

Troubleshooting and tips
The cursor does not correctly follow the
pen movements
Cause
Fault elimination
Pen incorrectly calibrated
► Calibrate the pen as shown under Hardware
and Sound / Tablet PC Settings in the Control
Panel, see "
Setting the pen", Page 37 and
"
Calibrat ing the pen", Pa ge 37.
Pen input not working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which ca n only be
operated using the pen, install the driver for
the standard model.
or
► If your device is one which can be
operated using th e pen and by finger,
install the driver for the "Dual Digitizer"
model.
The pen is in p ower-saving mode. ► Press the pen button gently to wake the pen
from sleep mode.
The pen battery is com pletely discharged.
► Insert the pen fully into its slot on the
notebook to charge the pen battery.
The notebook cannot be started
Notebook
Cause Troubleshooting
The bat tery is not installed correctly.
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
The batte ry is dead.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the mains adapter to the
notebook.
The power adapter is not connected correctly.
► Check whethe r the mains adapter is
connected co rrectly to the notebook.
► Switch the notebook on.
Fujitsu 93