User manual

Troubleshooting and tips
The notebook stops working
NotebookEnergysavingmode
Cause Tro ub lesho ot ing
Notebook is in energy saving mo
de.
► Leave energy saving mode.
An application programme has
caused the
malfunction.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
The battery is de ad.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the mains adapt
er to the
notebook.
The printer does not print
Printerdoesnot p
rint
Cause Tro ub lesho ot ing
The printer is not switched on. ► Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
The printer is not connecte d correctly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer drive r is faulty or not correctly
installed, or it is the wrong printer driver.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check w hethe
rthecorrectprinterdriveris
loaded (ref
er to the printer documentation).
The wireless connection to a network does not work
Thewire
lessconnection toanet w orkdoesnot work
Cause Tro ub lesho ot ing
The wireless component is disabled.
► Switch the wireless component on (see
"
Switch ing the wireless components on and
off", Page 56).
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.
► Check whether the wireless connect ion is
switched on via the software.
► Furthe
r information on using the wireless
compo
nent can be fou nd in the help files.
94 Fujitsu