User's Guide

107 - Introducing the Fingerprint Sensor Device
Basic Enrollment
The Enrollment Wizard will guide you through the process of enrolling a user. Unless you specified otherwise, after
OmniPass installation the Enrollment Wizard will launch on Windows login. If you do not see the Enrollment Wizard,
you can bring it up by accessing OmniPass via Control Panel.
1 Click Enroll to proceed to username and password verification. By default, the OmniPass Enrollment Wizard enters
the credentials of the currently logged in Windows user.
2 Enter the password you use to log in to Windows. This will become the “master password” for this
OmniPass user. In most cases, the Domain: value will be your Windows computer name. In a
corporate environment, or when accessing corporate resources, the Domain: may not be your
Windows computer name. Click [Next] to continue.
3 In this step OmniPass captures your fingerprint. Refer to “Enrolling a Fingerprint” on page 107 for additional
information.
4 Next, choose how OmniPass notifies you of various events. We recommend you keep Taskbar Tips on Beginner
mode taskbar tips and Audio Tips on at least Prompt with system beeps only until you get accustomed to how
OmniPass operates. Click [Next] to proceed with user enrollment. You will then see a Congratulations screen
indicating your completion of user enrollment.
5 Click [Done] to exit the OmniPass Enrollment Wizard. You will be asked if you’d like to log in to OmniPass with
your newly enrolled user; click [Yes].
Enrolling a Fingerprint
Enrolling a fingerprint will increase the security of your system and streamline the authentication procedure.
You enroll fingerprints in the OmniPass Control Center. With an OmniPass user logged in, double-click the system tray
OmniPass icon. Select the User Settings tab and click Enrollment under the User Settings area. Click Enroll
Authentication Device and authenticate at the authentication prompt to start device enrollment.