Operation Manual

Working with the noteb ook
Removing the card
Always remove the card according to the rules described below, to
ensure that none of your data is lost.
Using the appropriate icon in the task bar, s top the card.
1
2
► If the eject button is lowered, you must
first cause the eject but ton to release
from the notebook casing. To do this,
press the eject but ton until it pops out.
Press the eject button (1) so that the card
protrudes a little from the notebook.
► Pull the card out of the s
lot (2).
► Insert the card placeholder into the
slot gu ide.
► Carefully slide t he placeholder for the
card as far as it will go into the slot.
Do not use excessive force.
Loudspeakers and microphones
MicrophoneLoudspeakersBasslo uds peaker(subwoo fer)Volume con trol
Information on the exact position of the speakers and microphone can be
found in "
Ports and controls", Page 9.
Please refer to chapter "
Key comb inations", Page 27 for information on setting the volume
and also enabling/disabling the loudspeakers using key combinations.
If you attach an external microphone, the built-in microphone is disabled.
When you connect headphones or external speakers, the built-in s peakers are disabled.
Information on connecting headphones and a microphone can be found
in "
Connecting external devices", Page 63.
46 Fujitsu