Operation Manual

Working with the notebook
CD/DVD indicator
CD/DVDindicator
The CD/DVD indicator flashes when a data carrier is inserted. The indicato r goes out when
the drive is ready for reading. The indicator lights up when the drive is being accessed.
You may only remove the da ta carrier when the indicator is unlit.
If the CD /DVD indicator does not go out after a da ta carrier has been inserted, but
instead contin ues to flash, this means that the drive cannot acce ss the data carrier.
Either t he data carrier is damaged or dirty or you are using a data
carrier that the drive cannot read.
Inserting or removing a d ata carrier
InsertingRemoving
The notebook must be switched on.
2
1
► Push the insert/eject button (1).

The drive tray will open.
► Gently pull the drive tray (2) completely out.
► Place the data carrier in th e drive tray with
the printed side facing upwards.
or
► Remove a data carrier that has
been inserted.
► Push in the drive tray until you
feel it lock into place.
Fujitsu 39