Operation Manual

Removing and installing components
during servicing
Removing and installing compo
nents
during servicing
Only qualified technicians should repair your notebook. Unauthorised
opening or incorrect repair may greatly endanger the user (electric shock,
fire risk) and will invalidate your warranty.
Components
Serv icing
After consulting the Hotline/Service Desk, you may re move and install the
components described in this chapter yourself.
If you remove and install components w ithout consulting the Hotline/Service
Desk, then the warranty of your notebook will be voided.
Notes o n installing and removing boards
and components
• Switch the notebook off and pull the power plug out of the mains socket.
• Always remove the battery.
• Take care when you use the locking mechanisms on the battery and any other component.
• Never use s harp objects such as screwdrivers, scissors or knives as leverage to remove covers.
NotesBoardESD
Boards with electrostatic sensitive devices (ESD) are marked with the label
shown.
When handling boards fitted with ESDs, you must always observe the following
points:
• You must always discharge static build up (e.g. by touching a grounded
object) before working.
• The equipment and tools you use m ust be free of static charges.
• Remove the power plug from the mains supply before inserting or removing
boards containing ESD s.
• Always hold boards with ESDs by their edges.
• Never t ouch pins or c onductors on boards fitted with ESDs.
Fujitsu 65