Operation Manual

Connecting external devices
Connecting external devices
Always refer to the safety information provided in "Important notes", Page 13 before
connecting or disconnecting any devices to or from your notebook.
Always read the documenta tion supplied with the de vice you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Follow the steps below in order, when connect ing o r disconnecting
devices to your notebook:
With some devices such as USB devices, it is not necessary to switch off
the notebook and the device before c onnecting/disconn ecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied w ith the external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).
Connecting devices to the notebook
1. Turn off your notebook and all external devices.
2. Unplug your notebook and al
l devices from the mains sockets.
3. Connect the cables for y our external devices following the instructions.
4. Plug all power cables into t
he mains sockets.
DevicesPeripher alde
vices
Disconnecting devices from the notebook
1. Turn off your notebook and all external devices.
2. Unplug your notebook and all d ev
ices from the mains sockets.
3. Disconnect the cables for yo ur external device s following the instructions.
DevicesPeripher aldevices
98 Fujitsu Tech nology Solutions