Operation Manual

Removing and installing com po nents
during servicing
Removing and installing compo
nents
during servicing
Only qualified technicians should repair yo ur notebook. Un authorised
opening or incorrect repair may greatly endanger the user (electric shock,
fire risk) and will invalidate your warranty.
Components
Serv icing
After consulting the Hotline/Service Desk, you may remove and install the
components described in this chapter yourself.
If you remove and install components without consulting the Hotline/Service
Desk, then the warranty of your note book will be voided.
Notes on installing and removing boards
and components
• Switch the notebook off and pull the p ower plug out of the ma ins socket.
• Always remove the ba ttery.
• Take care when you use the locking mechanisms o n the battery and any other component.
• Never use sharp objects suc
h as screwdrivers, scissors or knives as leverage to remove covers.
NotesBoardESD
Boards with electrostatic sensitive devices (ESD) are marked with the label
shown.
When handling boards fitted with ESDs, you must always observe the following
points:
• You must always discharge static build up (e.g. by touching a grounded
object) before working.
• The e quipm ent and tools you use must be free of static charges.
• Remove the power plug fro m the mains supply before inserting o r removing
boards containing ESDs.
• Always hold boards w ith ESDs by their edges.
• Never touch pins or conductors on boards fitted with ESDs.
104 Fujitsu Tech nology Solutions