Operation Manual

Removing and installing com po nents
during servicing
Attaching the cover
1
2
2
► Place the cover into position, following the direction of the arrow (1).
► Secure the cover with the screws (2).
► In stall th e b a ttery again (see "
Removing and installing the battery", Pa ge 54).
► Turn the not ebook the right way up again and place it on a flat surface.
► R econnect the cables that were previously disconnected.
Finishing component removal
After you have removed or cha nged the system co m ponents as you requ ired, please
prepare you r device for operation again as follows:
► In stall the battery again (see "
Installing a battery", Page 55).
► Turn the not ebook the right way up again and place it on a flat surface.
► R econnect the cables that you disconnected before.
108 Fujitsu Tech nology Solutions