Operation Manual

Troubleshooting and tips
The external monitor is blank or
the image is unstable
ScreenMonitor
Cause Troubleshooting
The wrong external monitor has been
selected
or the wrong screen resolution has b
een set for
the application program.
► Terminate the application program
in
Windows by pressing
Alt
+
F4
.Ifthe
fault persists after closing the p
rogram, use
the k ey combination for switching
the screen
output (see "
Key combinations
", Page 45)to
switch over to the notebook’s L
CD screen.
Change the following setting:
► Set the screen resolution: Se t the screen
resolution as described in the documentation
foryouroperatingsystem.
► Select monitor: Select monito
r1or2as
described in the documentatio
n for your
operating system.
The cursor does not correctly follow the
pen movements
Cause
Fault elimination
Pen incorrectly calibrated Windows XP
► Ca librate the pe n as shown under Tablet
and Pen Settings in the Con trol Panel, see
"
Setting the pen", Page 38 and "Calibrati ng
the pen", Page 38.
Windows Vista
► Ca librate the pen as show
n under Tablet PC
Settings in the Control
Panel, see "
Setting
the pen", Page 38 and "Cal
ibrating the pen",
Page 38.
Windows 7
► Ca librate the pen as shown unde r Hardware
and Sound / Tablet PC Settings in the Control
Panel, see "
Setting the pen" , Page 38 and
"
Calibrating the pen", Page 38.
114 Fujitsu Tech nology Solutions