Operation Manual

Troubleshooting and tips
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is not switched on. ► Make sure that the printer is switc
hed
on and ready for operation (refer
to the
documentation sup plied with the
printer).
The printer is not conn ected corr
ectly.
► Ch eck that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
► Ch eck that the data cable connecting
the notebook to the printer is properly
connected.
► Ch eck whether the correct printer driver is
loaded (refer to the printer documentation).
The radio connection to a n
etwork does not work
Theradioconn ecti
ontoane tworkdoes not work
Cause Troubleshooting
The wireless c omponen t is di
sabled.
► Switch the radio component on (see
"
Switch ing the wireless compone nts on and
off", Page 69).
The wireless comp onent is enabled. D espite
this, the wireless connection to a n etwork does
not work.
► Ch eck whet her the radio connection is
switched on via the software.
► F urther information on using the radio
component can be found in the help files.
The battery discharges
too quickly
Battery:
Cause
Troubleshooting
The battery is either too
hot or too cold. In this
case the battery indica
tor flashes.
► Bring th e notebook up/down to a normal
temperature again.
► If the operating time of the battery life is
extremely short, the battery is probably too
old. Replace battery if necessary.
You may have an application r unning that
consumes a great deal of po wer due to frequent
accessing of the hard disk or optical drive.
► Use the mains adapter as frequent ly as
possible.
The maximum brightness may have been set
for the scree n .
► Set the screen slightly darker with the
key c ombination for Decreasing the sc reen
brightness in order to reduce the amount of
power being drawn.
116 Fujitsu Tech nology Solutions