Operation Manual

Working with the notebook
Replacing the pen tip
With use, the pen tip may become worn or may pick up foreign particles that can
scratch the screen. A da m aged or worn tip may not move freely over the screen,
causing unpredictable results when using the pen.
If your p en exh ibits these problems, you should re place the pen tip. To do this, use the supplied tool (1).
1
► To remove the tip, position the tip in the gap
between th e two ends of the tool supplied.
► Pinch the two ends of the supplied too l
together so that the tip is firmly clasped,
then pu ll it from the barrel.
► Rep lace the tip of the pen with one of
the spare tips supplied with your pen.
Insert the flat end of the tip into th e
barrel and exert ing gentle pressure, push
it in until it is firmly in place.
If the tip is worn or damaged, discard it.
Installing a pen cord
You should attach the pen with a pen cord to prevent accidentally dropping or losing it.
► Attach the end of the pen cord with the smaller loop to your pen.
► Attach the end of the pen cord with the larger loop to your notebook.
Fujitsu Technology Solutions 39