Operation Manual

Working with the noteboo k
Removing the card
Always remove the card according to the rules described below, to
ensure that none of your data is lost.
You can stop the card using the corresponding icon in the task bar:
► Le ft click o n the icon to safely remove hardware, located in the taskbar.
► Select the card you wa nt to stop
and remove.
► Press the "Ente r" key.

Wait for the dialog box which tel
ls you that it is now safe to remove the card.
1
2
► If the eject button is lowered, you must
first cause the eject button to release
from the notebook casing. To do this,
press the eject button until it pops out.
Press the eject button (1) so that the card
protrudes a little from the notebook.
► Pull the card out of the slot (
2).
► Insert the c ard placeholder into the
slot guide.
► Carefully slide the placeholder for the
card as far as it will go into th e slot.
Do not use excessive force.
Loudspeakers and microphones
Microph
one
Loudspe
akers
Basslou
dspeaker(subw oo fer)
Volume c
ontrol
Information on the exact position of the speakers and microphone can be
found in "
Ports and contr ols", Pag e 9.
Please refer to chapter "
Key combinations", Page 45 for information on set ting the volume
and also enabling/disabling the loudspe akers using key combinations.
If you attach an external microphone, the built-in microphon e is disabled.
When you connect headphones or external speakers, the built-in speakers are disabled.
Information on connecting headphones and a micro phone can be found
in "
Connecting external devices", Page 98.
66 Fujitsu Tech nology Solutions