Operation Manual

Working with the notebook
Port replicator
The port replicator (available as an accessory) is a docking device using which you can
quickly connect your notebook to your peripheral devices. For this purpose, the port replicator
features standard ports for monitor, HDM I, LAN and USB devices.
Only use the supplied 10 0 W mains adapt er from Fujitsu Technology
Solutions to run the port replicator.
Additional information on the port replicator and on the various external
devices that can be connected to it is contained in the chapter entitled
"
Connecting external devices", Page 98.
Setting up the port replicat
or
Select a suitable location for the port replicator before setting it up.
Follow the instructions below when d oing so:
• Never place the port replicator on a soft surface (e.g. c arpeting, upholstered furniture, bed).
This can block the air vents of the n otebook and cause overheating and damage.
• Place the port replicator o
n a stable, flat and non-slip surface. Please note that the
port replicator’s rubber
feet may mark c ertain types of surface.
• Never place the port replicator and the mains adapter on a heat-sensitive surface.
• Do not exp ose the port repl
icator to extreme enviro nmental conditions.
Protect the port replicator from dust, humidity and heat.
Fujitsu Technology Solutions 71